Giya G4 Cu is the smallest floorstanding loudspeaker in Vivid Audio's Giya Cu range, below the G3 Cu, G2 Cu and G1 Spirit Cu. Despite an enclosure just 1 m in height it remains a true four-way design with five drivers, all designed and made in-house by Vivid. It is intended for smaller rooms.
Key specs that matter
The D26 is a 26 mm alloy/carbon diaphragm dome unit for HF. Upper-mid comes from the D50Cu, a 50 mm alloy/carbon dome with copper cap. Lower-mid is the C100SCu, a 100 mm alloy cone unit with a 50 mm voice coil and copper cap. Two C125L bass drivers use 125 mm metal cones, 50 mm voice coils and an underhung motor design. Crossover frequencies are 250 Hz, 1 kHz and 4 kHz. Sensitivity is 86 dB (2.83 Vrms, 1 m, on axis), and impedance is 6 ohms nominal, 4 ohms minimum, with low reactance. Frequency range is 36 Hz - 36 kHz (-6 dB points), and frequency response is 39 Hz - 33 kHz (±2 dB on reference). Harmonic distortion (2nd and 3rd) is below 0.5% under 250 Hz, below 0.1% between 250 Hz and 3.5 kHz and below 0.3% above 3.5 kHz. Power handling is 400 W rms (music program). Dimensions are 1011 x 300 x 460 mm (H x W x D). Net weight is 25.4 kg with the internal crossover and 21 kg with the external crossover.
Engineering and use context
Each of the five drivers is loaded by its own tapered tube absorber. The D26 is the same tweeter as in the larger Giya models, and its first break-up mode is at 44 kHz. Vivid specifies the twin C125L bass drivers with a large travel for maximum output from their compact cones and chassis. Both the D50Cu and the smaller C100SCu have copper-capped magnet systems, which according to Vivid extend the high frequencies and reduce distortion. Bass loading is a bass reflex with an exponentially tapered tube.
Its enclosure is a GRP-and-balsa sandwich composite on a carbon fibre base, shaped without straight lines, hard edges or angles to eliminate reflections and resonances. Catalogue colours are Piano Black, Lexus Pearl White and Oyster Matte, with bespoke colours on request.
Like the other Giya Cu models, the G4 Cu can be ordered with an external crossover in a separate piano-gloss case. It has two pairs of input terminals and connects to the speaker through a professional eight-way cable with a metal-cased NL8 connector.
Pairing
An amplifier stable into 4 ohms is required. The external crossover allows bi-wiring or bi-amping. Active drive requires four amplifiers, a signal-level active crossover and the Giya break out unit.
Alternatives
The Giya G3 Cu is the next model up, with two 135 mm C135 bass drivers in a 1161 mm cabinet.