Hifiverse

Standlautsprecher - Gauder Akustik DARC 60 MK II

Beschreibung, Bilder, technische Daten und Spezifikationen

Gauder Akustik DARC 60 MK II
Bildquelle - (c) Gauder Akustik

The DARC 60 MK II is the smallest floorstanding loudspeaker in the DARC MK II series from Gauder Akustik of Renningen near Stuttgart. Above it in the range sit the DARC 80 MK II and the three-way DARC 100 MK II, and the closed DARC 40 MK II is the two-way monitor of the series. In Germany the base version costs EUR 21,998 per pair, and the diamond tweeter adds EUR 7,998 per pair.

Key specs that matter

Gauder lists the model as a 2.5-way floorstanding loudspeaker. Nominal impedance is 4 ohms and power handling is 190 W. Each speaker measures 1030 x 240 x 350 mm (H x W x D) and weighs 55 kg. Drive units are a hand-selected black XPulse driver, a hand-selected, mass-optimised XPulse sandwich bass/midrange driver and an ultralight beryllium tweeter. Both cones work together in the bass, and from 120 Hz the lower one rolls off steeply so that only the upper one covers the midrange. From 3.4 kHz the beryllium or optional diamond tweeter takes over.

Engineering and use context

Each cabinet has one vented and one closed chamber. The lower bass driver works in a low-tuned, high-pass-filtered bass reflex system, while the upper one sits in a closed volume so that cabinet resonances are not coupled out through the reflex port. In the walls, stacked aluminium ribs alternate with intermediate damping ribs. Gauder states that this RC rib technology eliminates sound conduction inside the walls and the bell sound of aluminium. Development of the construction was funded by the German Federal Ministry of Research, and the drop-shaped cabinet reduces reflection and diffraction effects.

Its crossover is symmetrical, with a 60 dB/octave slope and Mundorf components, and the negative pole of the drivers is decoupled from the system ground. Time Delay Control delays the tweeter signal electrically so that it radiates together with the bass/midrange driver. An upgrade to the diamond tweeter needs no crossover conversion and is possible at any time.

With the Bass Extension jumper inserted the low bass is extended linearly by one octave, and BE modules give intermediate steps of +1, +2, +3 or +3.5 dB. Bass and tweeter level jumpers have three settings each. On brushed versions every rib is brushed by hand and then lacquered, and the powder-coated finishes are black, white, silver and anthracite.

Pairing

An amplifier stable into 4 ohms is required. Bass Extension lowers the impedance between 25 Hz and 35 Hz, and removing the jumper raises it for smaller tube amplifiers. The WBT NextGen terminals allow bi-wiring.

Alternatives

The DARC 80 MK II is the taller 2.5-way floorstanding model of the series, 1160 mm high and rated at 330 W.

Spezifikationen