Hifiverse

Standlautsprecher - Gauder Akustik DARC 250 MK II

Beschreibung, Bilder, technische Daten und Spezifikationen

Gauder Akustik DARC 250 MK II
Bildquelle - (c) Gauder Akustik

The DARC 250 MK II is a four-way floorstanding loudspeaker from Gauder Akustik of Renningen, Germany, and the double bass model of the aluminium DARC MK II series with a diamond mid/high-range unit. It replaced the Berlina RC 9, an earlier four-way that also combined ceramic and diamond drivers. In the United States the pair is priced at USD 249,975, and a VU meter or a MusicLight can each be added for USD 4,995.

Key specs that matter

Gauder calls it a 4-way reference loudspeaker with diamond mid/high-range unit. Nominal impedance is 4 ohms and power handling is 810 W. Each speaker measures 1450 x 300 x 450 mm (H x W x D) and weighs 105 kg. The driver complement is two hand-selected black XPulse bass units, a 17 cm ceramic midrange, a 50 mm diamond midrange and a 20 mm diamond tweeter. Its ceramic midrange works from 143 Hz and is crossed over to the 50 mm diamond at 1.2 kHz.

Engineering and use context

All three units of the mid/high-range module are mounted on a common aluminium flange, so the driver geometry is identical in every speaker. Their housings are made by 3D printing and give each driver a defined rear volume, which is part of Gauder's calculation of the transfer function. Its crossover is an integral part of the module but is still adapted to each cabinet. According to Gauder, the diamond midrange avoids the beaming of the 17 cm ceramic cone, and its moving mass is significantly lower.

Each crossover is symmetrical with a 60 dB/octave slope and uses Mundorf and Intertechnik parts on four separate circuit boards to avoid magnetic coupling. Time Delay Control, integrated in the crossover, delays the diamond tweeter signal so that it radiates together with the midrange. Because the bass-to-midrange crossover sits so low, no delay is applied between bass and midrange.

Its bass reflex enclosure is built from solid aluminium ribs with intermediate damping ribs, a construction developed with funding from the German Federal Ministry of Research, and the drop-shaped cross-section reduces diffraction. Four adjustment screws with a fine gear and four scales set the distance to the floor on the Big Foot base. Jumpers set bass and tweeter level to -1.5 dB, 0 dB or +1.5 dB, and the Bass Extension jumper and BE modules raise the lowest octave by up to 4 dB.

Pairing

An amplifier stable into 4 ohms is required. With the Bass Extension jumper removed the impedance between 25 Hz and 35 Hz rises, so a smaller tube amplifier can drive it. The WBT NextGen terminals allow bi-wiring or bi-amping.

Alternatives

The DARC 500 MK II uses the same ceramic and diamond mid/high-range unit with four bass units in a quadruple bass reflex enclosure.

Spezifikationen