Hifiverse

Standlautsprecher - Gauder Akustik DARC 500 MK II

Beschreibung, Bilder, technische Daten und Spezifikationen

Gauder Akustik DARC 500 MK II
Bildquelle - (c) Gauder Akustik

The DARC 500 MK II is a four-way floorstanding loudspeaker from Gauder Akustik of Renningen near Stuttgart. It combines the four bass units of the DARC 240 MK II, arranged one above the other in a slim aluminium tower, with the ceramic and diamond mid/high-range unit of the DARC 250 MK II. German list price is EUR 299,998 per pair.

Key specs that matter

Gauder lists the model as a 4-way quadruple bass reflex loudspeaker with diamond mid/high-range unit. Nominal impedance is 4 ohms and power handling is 1250 W. Each speaker measures 1970 x 300 x 450 mm (H x W x D) and weighs 156 kg. Drive units are hand-selected black XPulse bass units, a 17 cm ceramic bass/mid driver, a 50 mm diamond midrange and a 20 mm diamond tweeter. The ceramic driver works from 143 Hz and is crossed over to the 50 mm diamond at 1.2 kHz.

Engineering and use context

Four woofers in one slim tower give even excitation of the room modes, according to Gauder. Inside the acoustically optimised quadruple bass reflex enclosure are two vented chambers and one closed chamber. Its walls are solid aluminium ribs with intermediate damping ribs, a construction whose development was funded by the German Federal Ministry of Research.

On the mid/high-range unit the three drivers share a common aluminium flange, so the geometry is identical in every speaker. Each sits in a 3D-printed housing with a defined rear volume that enters the calculation of the transfer function. Its crossover is an integral part of the unit but is adapted to each cabinet. The diamond midrange avoids the beaming of the 17 cm ceramic cone, Gauder states.

Gauder's tweeters have a voice coil glued so that it stays round, with a 0.9 mm air gap instead of the usual 1.4 - 1.8 mm and a flux density of 1.8 tesla. The symmetrical crossover uses Mundorf components and Clearwater internal wiring, and Time Delay Control delays the tweeter signal electrically so that it radiates together with the midrange.

Both bass and tweeter level are set by jumpers to -1.5 dB, 0 dB or +1.5 dB, and Bass Extension raises the lowest octave by up to 4 dB. Rhodium-plated copper bridges replace the gold-plated ones in the Double Vision version, which cannot be retrofitted. The Big Foot base has adjustable spikes, and MusicLight and a VU meter are options.

Pairing

An amplifier stable into 4 ohms is required. With the Bass Extension jumper removed the impedance between 25 Hz and 35 Hz rises. The WBT NextGen terminals allow separate connection of the bass and the mid/high range.

Alternatives

The DARC 750 MK II has the same four-woofer layout with a 90 mm diamond midrange that works from 600 Hz.

Spezifikationen