Hifiverse

Standlautsprecher - Gauder Akustik DARC 200 MK II

Beschreibung, Bilder, technische Daten und Spezifikationen

Gauder Akustik DARC 200 MK II
Bildquelle - (c) Gauder Akustik

The DARC 200 MK II is a three-way floorstanding loudspeaker with a 229 mm double bass system from the DARC series of Gauder Akustik, made in Renningen near Stuttgart. DARC is the brand's aluminium cabinet series. Among its floorstanding models, the DARC 200 sits above the 2.5-way DARC 60 and 80 and the three-way DARC 100, and below the four-way DARC 250, 500 and 750. A first-generation DARC 200 was available in 2020. In Germany the MK II lists at EUR 79,998 per pair in brushed aluminium.

Key specs that matter

Gauder specifies 4 ohms nominal impedance and 660 W power handling. Dimensions are 1320 x 300 x 450 mm (H x W x D), and weight is 89 kg per speaker. Drive units are hand-selected, mass-optimised XPulse sandwich drivers in the double bass system and above it, plus a hand-selected beryllium tweeter, with diamond as an extra-cost option. Crossover slope is 60 dB/octave. Finishes are brushed aluminium or powder coating in black, white, silver or anthracite, and the intermediate ribs come in black, white, silver or gold. No sensitivity or frequency range is published.

Engineering and use context

Its cabinet is made of solid aluminium ribs with intermediate dampers. Gauder states that this rib technology eliminates sound conduction inside the walls and the bell sound of a solid metal enclosure, and its development was funded by the German Federal Ministry of Research. According to the company, the advantages of aluminium over MDF grow with cabinet size. Viewed from above, the enclosure is drop-shaped to reduce reflection and diffraction. Inside are one vented and one closed chamber, and the bass section is a high-pass filtered bass reflex system.

The balanced crossover is built with Mundorf components and has 64 parts. TDC (Time Delay Control) is part of it, a circuit that delays the tweeter signal electrically. A diamond tweeter can replace the beryllium unit later, at home, without crossover conversion.

On the base, jumpers set bass volume and tweeter volume in three steps each (-1.5 dB, linear, +1.5 dB), part of a 9-way room acoustics adjustment. Bass Extension extends the low bass linearly downwards by one octave. Each Big Foot carries spikes adjustable from above through four screws with a fine gear, and four scales show the distance to the floor. Internal wiring is Clearwater. Registered pairs carry a 10-year warranty.

Pairing

An amplifier stable into 4 ohms is required. The WBT NextGen bi-wiring terminal allows separate amplification of the bass and mid/high sections. A DV (Double Vision) version replaces the gold-plated bridges with solid rhodium-plated copper bridges.

Alternatives

The DARC 100 MK II is the smaller three-way DARC floorstanding loudspeaker, with a 178 mm double bass system and 490 W power handling.

Spezifikationen