The BB6 XBD-A is the twin-cabinet active version of PMC's BB6 main monitor, introduced at NAMM 2017 alongside the BB6-A, MB3-A and MB3 XBD-A. Each channel combines the three-way BB6 cabinet with an XBD bass cabinet, and both use PMC's ATL (Advanced Transmission Line) bass loading.
Key specs that matter
Drive units per channel are two 15-inch Radial bass drivers, one in each cabinet, a 75 mm fabric midrange driver and a 34 mm soft-dome tweeter. Response is flat down to 17 Hz, and maximum SPL is 131 dB. Class-D amplification totals 5625 W per channel - a Control 1200 supplies 275 W to the tweeter and 550 W to the midrange, one Power 2400 drives the bass driver of the main cabinet and an additional Power 2400 is dedicated to the 15-inch driver in the XBD cabinet. Each channel measures 2080 x 432 x 790 mm and weighs 136 kg.
Engineering and use context
According to PMC, the twin-cabinet XBD versions give 3 dB more headroom than the single-cabinet models. The tweeter and midrange are hand-built and precision-matched, and the Radial driver is designed specifically for ATL enclosures. DSP optimises the response of the drivers, with a 24 dB per octave crossover, modelled excursion limiting for protection, shelving EQ and four presets. A wired RJ45 desktop remote with a backlit display and jog wheel gives input switching and EQ adjustment from the listening position. Cabinets are of highly braced, resonance-damped Medite, with offset HF and MF drivers and acoustically absorbent StealthBaffles.
Pairing
A preamplifier, console or monitor controller with volume control is required, connected to the digital or analogue inputs. The Point One inputs allow direct connection of an LFE channel.
Alternatives
The MB3 XBD-A is the smaller twin-cabinet system of the same range, with 12-inch Radial bass drivers and a maximum SPL of 129 dB.