Hifiverse

Standlautsprecher - Gauder Akustik ARCONA 100 SD

Beschreibung, Bilder, technische Daten und Spezifikationen

Gauder Akustik ARCONA 100 SD
Bildquelle - (c) Gauder Akustik

The ARCONA 100 SD is the three-way floorstanding loudspeaker of the Arcona SD series from Gauder Akustik in Renningen, Germany. Gauder describes Arcona SD as its entry-level series with technology transfer from its reference loudspeakers. Below the 100 SD in the same family are the 2.5-way Arcona 60 SD and 80 SD floorstanding models, the closed two-way Arcona 40 SD and the Arcona Center SD. A pair is listed at EUR 8,896 in Germany and at USD 16,975 in the US.

Key specs that matter

Gauder specifies a 3-way floorstanding loudspeaker with double bass, a nominal impedance of 4 ohms and power handling of 270 W. Each cabinet measures 1140 x 210 x 390 mm (H x W x D) and weighs 29 kg. Driver complement is two bass drivers, a black XPulse midrange driver in its own closed volume and an ultra-light soft-dome tweeter. Finishes are piano high-gloss black and piano high-gloss white.

Engineering and use context

Gauder's patented XPulse cone is lightweight aluminium with a super-light honeycomb plastic backing. Its tweeter has a resin-coated silk dome that is cut off and given a separate external surround, glued to the edge of the voice coil. That voice coil stays round after winding, so the air gap is only 0.9 mm wide and flux density reaches 1.8 tesla.

Bass loading is reflex, with an acoustically optimised enclosure vented downwards through a flow-optimised port. The drop-shaped cabinet is made of 22 mm MDF, has rounded corners and carries bracing ribs inside. According to Gauder, the shape prevents reflection and diffraction effects.

A symmetrical crossover with Mundorf components separates the three ways at a slope of 50 dB/octave. In this balanced circuit the negative pole of each driver is decoupled from ground by low-pass components rather than wired straight to it. Across its range Gauder places the bass-to-midrange crossover between 120 Hz and 166 Hz. With the Bass Extension bridge inserted, the lowest octave rises by 4 dB, and modules in the sockets at the back of the terminal give +1, +2, +3 or +3.5 dB.

Internal wiring is Clearwater cable, and the terminals are WBT NextGen. Spike extenders come in black or silver, and a grille frame can be ordered. Each speaker is built in Renningen, and registered speakers carry a 10-year guarantee.

Pairing

An amplifier stable into 4 ohms is required. With the Bass Extension bridge removed, impedance in the low bass rises and smaller tube amplifiers can be used.

Alternatives

The ARCONA 80 SD is the next floorstanding model down, a 2.5-way design of 1050 mm height rated at 170 W.

Spezifikationen