Hifiverse

Regallautsprecher - Edifier S880DB MKII

Beschreibung, Bilder, technische Daten und Spezifikationen

Edifier S880DB MKII
Bildquelle - (c) Edifier

The S880DB MKII is Edifier's 2.0 active Hi-Fi speaker pair and the successor to the S880DB, with upgraded drivers, a new digital platform, LDAC Bluetooth and a subwoofer output. Electronics sit in the right-hand active speaker, and the passive speaker connects to it by cable. It is certified for both Hi-Res Audio and Hi-Res Audio Wireless, and Edifier lists it in a dark wood finish.

Key specs that matter

Each speaker has a 32 mm titanium dome tweeter with a 25 mm voice coil and a neodymium magnet, above a redesigned 95 mm long-throw mid-low driver with an aluminium diaphragm. Total output power is 88 W RMS - 12 W x 2 for treble and 32 W x 2 for the mid-low drivers. Frequency response is 50 Hz - 40 kHz, and the signal-to-noise ratio is at least 85 dB(A). Inputs are USB-C, optical, coaxial, Line In 1, Line In 2 and Bluetooth 5.3 with SBC and LDAC. Input sensitivity is 500 ±50 mV on Line In 1 and 700 ±50 mV on Line In 2. The active speaker measures 145 x 237 x 207 mm and the passive one 145 x 237 x 192 mm (W x H x D), and net weight is 6.27 kg.

Engineering and use context

Edifier combines Texas Instruments chipsets with an XMOS XU216 processor rated at 2,000 MIPS for full digital signal processing. Its ADC and DSP run at up to 24-bit/192 kHz, the digital interface transceiver at up to 24-bit/216 kHz and the DAC at up to 32-bit/384 kHz. USB-C, optical and coaxial inputs accept 44.1, 48, 96 and 192 kHz, while the Texas Instruments analogue front end for the two line inputs works at 24-bit/96 kHz. Over USB the speaker follows USB Audio Class 2.0, and only Windows 8 or earlier needs a driver.

LDAC runs at up to 990 kbps and carries 24-bit/96 kHz from Android 8.0 and later. A SUB OUT port connects an external subwoofer, which is not included. On the rear panel are Volume/Source, Treble and Bass knobs and an OLED display with auto-dimming. The remote control is rechargeable and works on 2.4 GHz. With the EDIFIER ConneX app the owner switches inputs, controls playback, selects or customises EQs and upgrades the firmware. Mains input is 100-240 V at 400 mA, with a main power switch on the rear. Included are a USB-C to USB-C cable, an RCA to RCA cable and a 3.5 mm to RCA cable.

Pairing

No external DAC is required for a computer on USB-C or a television on the optical or coaxial input. A turntable requires an external phono stage on one of the line inputs. The SUB OUT port allows an active subwoofer to be added.

Alternatives

The original Edifier S880DB has a 19 mm titanium dome tweeter, a 55 Hz lower limit and Bluetooth 5.1 with aptX, and has no subwoofer output.

Spezifikationen

  • Modellbezeichnung

    S880DB MKII

  • Untere Grenzfrequenz +/- 3dB (Hz)

    50

  • Obere Grenzfrequenz +/- 3dB (Hz)

    40 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    2 x 13, 2 x 32

  • Größe (sm)

    14.5 x 23.7 x 20.7 (Active Speaker), 14.5 x 23.7 x 19.2 (Passive Speaker)

  • Gewicht (kg)

    6.27 (pair)

  • Offizieller Link

Weitere Komponenten