Edifier's S2000MKIII is the third generation of the S2000 active hi-fi bookshelf speaker. It continues the styling of the S3000 and combines planar diaphragm tweeters with aluminium diaphragm mid-bass units, three digital amplifier chips per pair, two DSP chips, digital and analogue inputs and Bluetooth with aptX HD. Hi-Res Audio certification covers signals up to 24-bit/192 kHz, and the US price is USD 699.99.
Key specs that matter
Total output power (RMS) is 15 W + 15 W for the treble and 50 W + 50 W for the mid-range bass. Frequency response is 45 Hz - 40 kHz. Signal-to-noise ratio is ≥ 85 dB(A), and noise level is ≤ 25 dB(A). Input sensitivity is 600 ±50 mV for Line In 1, 800 ±50 mV for Line In 2, 350 ±50 mFFS for optical and coaxial and 450 ±50 mFFS for Bluetooth. Bluetooth is version 5.0 with aptX HD. Edifier gives 50 m2 as the room size the pair can cover.
Engineering and use context
Each cabinet has a planar diaphragm tweeter and a 140 mm mid-bass unit with an aluminium alloy diaphragm in an aluminium basin, developed with the Klippel analysis system. Three TI TAS5754 digital amplifier chips drive the treble and mid-bass groups independently. Each mid-bass unit has its own TAS5754 in a PBTL parallel bridge configuration, and the PWM carrier frequency is 768 kHz.
Two TI TLV320AIC3254 DSP chips perform independent electronic crossover and dynamic management for the treble and mid-bass channels. For the analogue inputs Edifier uses a Burr-Brown PCM1802 converter with a signal-to-noise ratio and dynamic range of up to 105 dB. Optical and coaxial signals pass through a Burr-Brown PCM9211 receiver that accepts 24-bit audio at up to 216 kHz. Bluetooth is based on a Qualcomm QCC3031 module with a built-in aptX HD decoder.
A digital display shows the source, the sound mode and the volume. Four sound modes are stored. Its cabinet has a matte lacquer finish with walnut-texture side panels. A remote control, a 3.5 mm to RCA cable, an RCA to RCA cable and an optical cable are supplied.
Pairing
No separate amplifier or DAC is required. Two digital sources (optical and coaxial) and two analogue line-level sources can stay connected at once. A turntable needs a phono stage ahead of a line input.
Alternatives
The S3000MKII is a larger Edifier active bookshelf pair with horn-loaded planar magnetic tweeters and a wireless link between the cabinets.