Hifiverse

Regallautsprecher - Edifier S1000W

Beschreibung, Bilder, technische Daten und Spezifikationen

Edifier S1000W
Bildquelle - (c) Edifier

The S1000W is a wireless hi-fi bookshelf speaker pair from Edifier with Wi-Fi and Bluetooth connection, class-D amplification and DSP crossovers built in. It is Hi-Res Audio certified and accepts digital audio signals up to 24-bit/192 kHz. Apple AirPlay 2, Amazon Alexa, TIDAL Connect and Spotify Connect are supported.

Key specs that matter

Total output power (RMS) is 35 W x 2 for the mid-range/bass and 25 W x 2 for the treble, 120 W in all. Driver units are a 140 mm mid-range/bass and a 25 mm tweeter per cabinet. Frequency response is 45 Hz - 40 kHz, signal-to-noise ratio is ≥ 90 dB(A) and noise level is ≤ 25 dB(A). Audio inputs are Wi-Fi, AirPlay 2, Bluetooth, optical, coaxial and two RCA pairs. Input sensitivity is 700 ±50 mV for Line In 1, 900 ±50 mV for Line In 2, 450 ±50 mV for optical and coaxial and 500 ±50 mV for Bluetooth. Bluetooth is version 5.2. Each speaker measures 193 x 345 x 295 mm (W x H x D), and Edifier lists a net weight of 16.77 kg.

Engineering and use context

Inside, a DSP performs the electronic crossover and dynamic control ahead of the class-D digital power amplifiers, with separate channels for the tweeter and the mid-range/bass unit. Its tweeter has a titanium dome, and Edifier quotes better dispersion and sensitivity than plastic tweeters. An aluminium cone is used for the 140 mm bass unit. Both drivers are front-facing. Edifier describes the cabinet as angled and designed to reduce resonance.

Wi-Fi setup is done in the Edifier Home app. Over the network the S1000W can join a multi-room music system through AirPlay, Alexa or Spotify, with voice control of playback from an Apple HomePod mini or an Amazon Echo device. A remote control is included, and bass, treble and volume controls are also on the speaker. A 3.5 mm to RCA cable, an RCA to RCA cable and an optical cable are supplied.

Pairing

No separate amplifier, receiver or DAC is required. A turntable requires a phono preamplifier ahead of the RCA input. There is no subwoofer output. A powered subwoofer connects through an RCA Y-splitter at the source.

Alternatives

The S2000MKIII is an Edifier powered bookshelf pair without Wi-Fi, with planar diaphragm tweeters and aluminium diaphragm mid-bass units.

Spezifikationen

  • Modellbezeichnung

    S1000W

  • Untere Grenzfrequenz +/- 3dB (Hz)

    45

  • Obere Grenzfrequenz +/- 3dB (Hz)

    40 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    2 x 32, 2 x 25

  • Größe (sm)

    19,3 × 34,5 × 29,5

  • Gewicht (kg)

    16.77

  • Offizieller Link

Weitere Komponenten