The RUBICON LCR is a passive wall-mounted loudspeaker from DALI's RUBICON series, which the Danish company now shows among its discontinued products. Thanks to a rotatable hybrid tweeter module, the same model can be used as a left, right or centre channel speaker in a home cinema. A pair was listed in Europe at EUR 1,500 in 2023. Finishes were black, white, maroon and walnut, the last one in real wood veneer.
Key specs that matter
Frequency range is 59 Hz - 34 kHz (±3 dB). Sensitivity is 89 dB (2.83 V/1 m), nominal impedance is 4 ohms and maximum SPL is 109 dB at 1 m. As a 2 + ½-way design, it has crossover points at 3.1 kHz and 14 kHz. The driver complement is one 165 mm low-loss wood fibre woofer and a hybrid tweeter module of a 29 mm soft dome and a 17 x 45 mm planar element. Recommended amplifier power is 20 - 150 W.
Engineering and use context
A bass port configuration is built into the back panel of the cabinet. DALI uses the wall surface behind the speaker to extend the acoustic properties of this port. The LCR has the same hybrid tweeter and low-loss wood fibre driver as the floorstanding RUBICON models.
Its woofer cone has a light, rigid and randomly uneven structure, intended for piston-like movement with reduced surface resonance, and DALI states that it lowers the complexity of the central part of the motor. A soft, low-loss rubber surround was designed specifically for this model. Its cast-aluminium chassis is shaped for maximum airflow around the cone and magnet system.
In the motor, an SMC (Soft Magnetic Composite) pole-piece is surrounded by a slitted copper cap that focuses the SMC effect to reduce distortion. This approach comes from the SMC-based Linear Drive System introduced with the EPICON series. DALI manufactures these drivers in-house at its production facilities in central Denmark.
Inside the hybrid module, the soft dome uses a very light voice coil. Working together with the dome, the planar element reaches down to 2.5 kHz and keeps dispersion wide as the dome becomes more directional at higher frequencies.
Pairing
An amplifier or AV receiver stable into 4 ohms is required. Three units form a full left, centre and right front row in a home cinema.
Alternatives
The OPTICON LCR MK2 is another DALI on-wall LCR model, with a 2.8 kHz lower crossover point.