Hifiverse

Regallautsprecher - DALI OPTICON LCR MK2

Beschreibung, Bilder, technische Daten und Spezifikationen

DALI OPTICON LCR MK2
Bildquelle - (c) DALI

The OPTICON LCR MK2 is a passive on-wall loudspeaker from DALI's OPTICON MK2 range. Its flat cabinet is optimised for wall mounting and is used as a left, centre or right channel in a home cinema, as a surround speaker or as one of a stereo pair - hence the name LCR. DALI introduced the MK2 version in February 2021 at USD 1,099 per speaker, in satin black, satin white and tobacco oak.

Key specs that matter

Frequency range is 70 Hz - 30 kHz (±3 dB), and sensitivity is 89 dB (2.83 V/1 m). Nominal impedance is 4 ohms, with a maximum SPL of 109 dB at 1 m. It is a 2 + ½-way design crossed over at 2.8 kHz and 14 kHz. A 29 mm soft dome and a 17 x 45 mm planar tweeter make up the high frequency section, and one 165 mm woofer covers bass and midrange. Recommended amplifier power is 30 - 150 W. The bass reflex enclosure is tuned to 45 Hz. Each speaker measures 482 x 285 x 128 mm (H x W x D) and weighs 8.0 kg. Connection is by two gold-plated screw terminals, and rubber feet and a manual are included.

Engineering and use context

A rear reflex system is used here, unlike the Dual Flare ports of the other OPTICON MK2 models. Its openings let the airflow out at the back, parallel to the wall, so the wall on which the speaker hangs becomes an integral part of the reflex channel.

Inside the rotatable hybrid tweeter module, the 29 mm fabric dome is adapted from the CALLISTO series and the 17 x 45 mm planar element is a new development. Both drivers are mounted on a cast aluminium faceplate with dispersion control detailing.

The woofer has a paper pulp and wood fibre cone for minimal break-up resonance. Its magnet system consists of a large ferrite ring magnet around a pole-piece made entirely of SMC (Soft Magnetic Composite). DALI states that SMC greatly reduces mechanical distortion caused by hysteresis and eddy currents, with a large reduction in third-order distortion.

A 25 mm thick front baffle and extra internal bracing stiffen the cabinet. OPTICON MK2 speakers are made and tested in central Denmark, from cutting and routing the wood laminate panels to installing drivers and crossover. Each stereo pair is built and tested by one technician with components from the same batch.

Pairing

An amplifier or AV receiver stable into 4 ohms is required. The two screw terminals do not allow bi-wiring or bi-amping. Three units form a matched left, centre and right front array.

Alternatives

The RUBIKORE ON-WALL is a later DALI on-wall speaker with a rotatable hybrid tweeter module and a Clarity Cone woofer.

Spezifikationen

  • Modellbezeichnung

    OPTICON LCR MK2

  • Untere Grenzfrequenz +/- 3dB (Hz)

    70

  • Obere Grenzfrequenz +/- 3dB (Hz)

    30000

  • Empfindlichkeit (dB at 1 W/1m)

    89

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    30 - 150

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten