The RUBICON 2 C is an active wireless stand-mount loudspeaker from DALI of Denmark and the compact model of the RUBICON C series, beside the RUBICON 6 C and RUBICON 8 C. It combines the drivers and cabinet construction of the passive RUBICON series with amplifier technology from the CALLISTO series and the wireless link of the DALI SOUND HUB. French pricing for a pair with the hub was EUR 4,649. Finishes are High-Gloss White, High-Gloss Black and Walnut.
Key specs that matter
Drivers are one 29 mm soft dome tweeter and one 165 mm bass/midrange unit, crossed over at 2.6 kHz. Crossover principle is hybrid, full active 24-bit DSP and passive all analogue. Frequency range is 46 Hz - 26 kHz (±3 dB) and maximum SPL is 108 dB. Each speaker has 250 W of discrete Class D amplification (closed loop, self-oscillating) and a Burr Brown PCM1796 DAC with balanced output. Its bass reflex enclosure is tuned to 51 Hz. Wireless input is full 24-bit/96 kHz, and an RCA input to the ADC has 5 kohms impedance and 1.4 V sensitivity. Dimensions are 353 x 195 x 335 mm (H x W x D), and weight is 8.4 kg.
Engineering and use context
In place of a passive analogue filter, a DSP crossover splits the signal, and two closed-loop, self-oscillating Class D amplifiers drive the woofer and tweeter directly. DALI uses global negative feedback, and the amplifier rating is a peak figure available for up to 5 seconds. THD is below 0.005% from 20 Hz to 20 kHz at 1 W into 4 ohms. A 50 MIPS DSP is connected via I2S to the Burr Brown DAC, which has 123 dB of dynamic range, and current-to-voltage conversion at the power amplifier input avoids AC coupling capacitors.
DALI makes the drivers in-house in central Denmark. Its woofer has a wood fibre cone with a light, rigid and randomly uneven structure for piston-like movement and reduced surface resonance, a soft low-loss rubber surround and a cast-aluminium chassis. An SMC pole-piece surrounded by a slitted copper cap sits in the motor. The ultra-light 29 mm dome reaches higher than the dome of the DALI hybrid tweeter module, with a light voice-coil of copper-clad aluminium wire and a ferrite magnet. Both drivers are screwed directly into a 25 mm MDF baffle.
Audio travels in the 5.8 GHz band over a proprietary 30-bit protocol as uncompressed I2S at 24-bit/96 kHz, with the spare bits used for volume and speaker ID. The link needs no Wi-Fi network, and latency is below 25 ms.
Pairing
The DALI SOUND HUB is required as the central unit of the system. Its optional NPM-2i BluOS module adds network streaming and multiroom, and an optional HDMI module adds ARC/eARC TV input. No external power amplifier or speaker cable is needed.
Alternatives
The DALI OBERON 1 C is a smaller wireless active stand-mount model that works with the same SOUND HUB.