Hifiverse

Regallautsprecher - Klipsch R-40M

Beschreibung, Bilder, technische Daten und Spezifikationen

Klipsch R-40M
Bildquelle - (c) Klipsch

The R-40M is a passive two-way bookshelf speaker in the Reference series of Klipsch Group, Indianapolis, and the smaller of the two bookshelf models in the generation introduced in 2021. Its tweeter is horn-loaded, and the enclosure material is MDF. Black textured wood grain vinyl is the only finish.

Key specs that matter

Drive units are a 25 mm aluminium LTS tweeter mated to a 90 x 90 square Tractrix horn and a single 102 mm spun-copper TCP woofer. Crossover frequency is 1.77 kHz. Frequency response is 71 Hz - 21 kHz (±3 dB). Klipsch quotes in-room sensitivity of 91 dB (2.83 V/1 m, half-space anechoic). Power handling is 50 W continuous and 200 W peak, and nominal impedance is 8 ohms. Enclosure type is bass reflex with rear ports. Inputs are single gold-plated binding posts. Dimensions are 298 x 146 x 216 mm (H x W x D), and weight is 3.2 kg.

Engineering and use context

For this generation the outer dimensions of the Tractrix horn were increased. According to Klipsch, the larger horn allows directivity control over a wider bandwidth. Behind it sits a Linear Travel Suspension tweeter, an aluminium dome with a Kapton suspension, and Klipsch states that LTS minimises distortion.

TCP stands for thermoformed crystalline polymer. Compared with earlier cones, the TCP woofer cone has a steeper angle, and additional ribbing increases its overall rigidity for less cone breakup at higher frequencies. Klipsch describes this woofer as trickle-down technology from the Reference Premiere series, and the cone has a spun-copper finish.

Its cabinet is reinforced 19 mm MDF with an all-new bracing design that reduces cabinet vibration. This vinyl wrap is scratch-resistant. On the front, the fasteners are hidden, the horn spans the baffle edge to edge, and a low-profile grille is held by magnets.

Pairing

An amplifier rated for 8-ohm loads is required. The single set of binding posts does not allow bi-wiring or bi-amping.

Alternatives

The R-50M is the larger bookshelf model of the same Reference generation, with a bigger spun-copper TCP woofer.

Spezifikationen

  • Modellbezeichnung

    R-40M

  • Untere Grenzfrequenz +/- 3dB (Hz)

    71

  • Obere Grenzfrequenz +/- 3dB (Hz)

    21000

  • Empfindlichkeit (dB at 1 W/1m)

    91

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    50 - 200

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    29.8 × 14.6 × 21.6

  • Gewicht (kg)

    3.2

  • Offizieller Link

Weitere Komponenten