The Edifier MR3 is a powered two-way studio monitor pair, one active and one passive speaker, intended for home studios, video editing and daily listening. It carries Hi-Res Audio certification, comes in black or white and was listed in the US at USD 149.99 per pair.
Key specs that matter
Each cabinet has a 90 mm mid-low driver and a 25 mm silk dome tweeter. Output power is 18 W + 18 W RMS with DRC on. Frequency response is 52 Hz - 40 kHz, maximum SPL is 92.5 dB (peak, 1 m) and signal-to-noise ratio is 85 dB(A) or better. Inputs are balanced 6.35 mm TRS, unbalanced RCA, 3.5 mm AUX and Bluetooth 5.4 with the SBC codec. Input sensitivity is 1228 ± 100 mV (+4 dBu) on TRS and 775 ± 50 mV on RCA and AUX. A 3.5 mm headphone output is on the active speaker. Dimensions are 125.5 x 220 x 185 mm for the active speaker and 125.5 x 220 x 176 mm for the passive one, and net weight is 3.85 kg.
Engineering and use context
Both the analogue front end and the Class D amplifier come from Texas Instruments and are configured to work at 24-bit/96 kHz. Around each tweeter sits a dimpled waveguide. According to Edifier, it gives a flatter and more extended high-frequency response and more consistent output across a wider listening area.
On the rear panel, the High knob cuts or boosts frequencies above 10 kHz by ±6 dB and the Low knob cuts or boosts the region around 125 Hz by ±6 dB. A low cut-off filter is adjustable from 20 to 100 Hz. Its Bluetooth 5.4 receiver allows two devices to be connected at the same time. The EDIFIER ConneX app adds playback control on the Bluetooth input as well as sound-effect selection and customisation. Over the supplied speaker connecting cable, the active speaker drives the passive one.
Pairing
The balanced TRS input takes the +4 dBu output of an audio interface or mixer. RCA and AUX accept unbalanced line-level sources. A digital source requires an external DAC, and a turntable requires a phono stage. The box contains 3.5 mm to 3.5 mm, 3.5 mm to RCA, speaker connecting and power cables.
Alternatives
The Edifier MR4 is a two-way studio monitor from the same MR range.