Hifiverse

Regallautsprecher - Acoustic Energy AE100

Beschreibung, Bilder, technische Daten und Spezifikationen

Acoustic Energy AE100
Bildquelle - (c) Acoustic Energy

The AE100² is the compact stand-mount and bookshelf loudspeaker of the 100 Series from the British manufacturer Acoustic Energy. It is the second generation of the AE100, and Acoustic Energy describes the current 100 Series as an all-new design from the ground up. The aim was high sound pressure levels from a small enclosure. Its styling takes cues from the 500 Series.

Key specs that matter

This is a two-way, rear-ported design with a 25 mm fabric dome tweeter and a 125 mm paper cone mid/bass drive unit, crossed over at 2.9 kHz. Frequency range is 51 Hz - 26 kHz, sensitivity is 87 dB and impedance is 6 ohms. Power handling is 120 W, and peak SPL is 112 dB. Each speaker measures 290 x 165 x 250 mm (H x W x D), and the pair weighs 9.2 kg.

Engineering and use context

According to Acoustic Energy, high output from the small cabinet comes mainly from the ultra-high force, long-throw motor system of the 125 mm mid/bass unit. Its doped paper cone allows a higher crossover point and a smooth transition to the tweeter. Tweeter and bass driver were designed in tandem for the 100 Series, and the mid/bass units sit closer to the tweeter than before, as in the 500 Series.

Acoustic Energy's bespoke 25 mm soft dome tweeter has a high-power neodymium motor assembly and is mounted in the company's Wide Dispersion Technology (WDT) waveguide.

The cabinet is made of 15 mm HDF (high-density fibreboard) with tuned internal bracing against resonances. Acoustic Energy states that HDF allows thinner walls with no loss in mass or stiffness, and so a larger internal volume for deeper bass without a larger cabinet. Bass is reflex-loaded through a slot-shaped duct at the rear, with a new tooled vent. Its large cross-sectional area avoids air turbulence and reduces chuffing and distortion.

Finishes are black, satin white and walnut vinyl veneer. Slim cloth grilles attach magnetically.

Pairing

An amplifier or AV receiver stable into 6 ohms is required. The matching subwoofer in the 100 Series is the AE SUB.

Alternatives

The AE500² is the stand-mount model of Acoustic Energy's higher 500 Series.

Spezifikationen