Hifiverse

Regallautsprecher - Acoustic Energy AE1 Active

Beschreibung, Bilder, technische Daten und Spezifikationen

Acoustic Energy AE1 Active
Bildquelle - (c) Acoustic Energy

The AE1 Active is a two-way active standmount loudspeaker from Acoustic Energy, launched in 2017 to mark the 30th anniversary of the British company. Its name goes back to the original AE1 that Phil Jones designed in 1987 with metal diaphragms for both drive units. US prices were USD 1,999 per pair in black or white and USD 2,199 in walnut. Acoustic Energy discontinued the model in 2026 and replaced it with the AE Active.

Key specs that matter

Each speaker has a 125 mm ceramic aluminium sandwich cone and a 27 mm aluminium dome tweeter with the WDT (Wide Dispersion Technology) waveguide. Two 50 W RMS Class A/B amplifiers per speaker, one for LF and one for HF, run from a linear power supply. The crossover is a 3.5 kHz fourth-order Linkwitz-Riley network. Frequency range is 42 Hz - 28 kHz (±6 dB, 1 m, pink-weighted MLS noise). Input sensitivity is 104 dB for 1 V RMS at 1 kHz. Maximum SPL is 105 dB (band-limited sine sweep) and peak SPL is 115 dB (toneburst). Horizontal coverage is 130 degrees, vertical 120 degrees. Dimensions are 300 x 185 x 250 mm (H x W x D), and a pair weighs 17 kg.

Engineering and use context

According to Acoustic Energy, this is an all-analogue design. During development the team tried wireless inputs, switch mode power supplies, Class D amplification and DSP before settling on wired inputs, linear supplies and Class A/B stages. Its filter networks are fully active, ahead of the amplifiers.

The mid/bass cone uses the pure piston ceramic aluminium technology of the brand, now in its fifth generation. In the WDT tweeter the waveguide is incorporated into the surround. AE states that it widens high-frequency coverage and narrows lower frequencies, a behaviour the company calls constant directivity.

Cabinet walls are 18 mm MDF with bracing and damping panels. A slot port appears on an AE1 for the first time, and its slotted profile gives a large surface area and lowers the audibility of air passing through it. Rear-panel controls are volume from 0 dB to -inf and HF and LF shelves of ±2 dB, and mains enters through an IEC C13 socket with a switchable 110/240 V setting. Finishes are Piano Black, Piano White and Piano Walnut real wood veneer, with slim cloth grilles that attach magnetically. A pair of 3 m RCA interconnects, two IEC mains leads, eight isolating foam feet and a certificate of authenticity are in the box.

Pairing

A line-level source with a variable output, or a preamplifier, is required. Each speaker has RCA and balanced XLR inputs, and the two must not be connected at the same time. There is no loop-through between the speakers, and each requires its own signal lead and mains connection.

Alternatives

The AE Active is the active loudspeaker that replaced the AE1 Active in the Acoustic Energy range.

Spezifikationen

  • Modellbezeichnung

    AE1 Active

  • Untere Grenzfrequenz +/- 3dB (Hz)

    42 (+/-6dB)

  • Obere Grenzfrequenz +/- 3dB (Hz)

    28000 (+/-6dB)

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    2 x 50 (A/B)

  • Größe (sm)

    30.0 × 18.5 × 25.0

  • Gewicht (kg)

    9

  • Offizieller Link