Hifiverse

Regallautsprecher - Acoustic Energy AE1 40th Anniversary

Beschreibung, Bilder, technische Daten und Spezifikationen

Acoustic Energy AE1 40th Anniversary
Bildquelle - (c) Acoustic Energy

The AE1 40th Anniversary is a two-way stand-mount loudspeaker from Acoustic Energy of the UK, a new version of the compact AE1 monitor that launched the company in 1987. That speaker was used in studios and audiophile systems alike. All of its parts had long been out of production, so Acoustic Energy designed the new one from scratch to match the original. Its defining elements were kept - a high-mass, high-stiffness straight-sided cone driven by a high-BL motor, a small, strong and heavy cabinet with twin front ports, and a metal dome tweeter.

Key specs that matter

Drive units are a 29 mm anodised aluminium dome tweeter and a 125 mm spun, hard anodised aluminium cone mid/bass driver, crossed over at 2.8 kHz. Frequency range is 50 Hz - 45 kHz (±6 dB). Sensitivity is 87 dB (2.83 V/1 m) and impedance is 6 ohms, with 150 W power handling. Dimensions are 295 x 180 x 240 mm (H x W x D) and each speaker weighs 7 kg.

Engineering and use context

Its new tweeter has a 29 mm voice coil that supports a slightly larger aluminium dome than the usual 25 mm, for lower distortion through a greater radiating area. Behind the ultra-shallow dome profile sits a large rear chamber that keeps the fundamental resonance low and absorbs rear energy. As in the original, this tweeter is ferrofluid cooled and damped.

Acoustic Energy kept the straight-sided aluminium cone of the first AE1 and its forming process, spinning instead of the more usual pressing. A thick, hard anodised ceramic layer on both sides makes the cone a sandwich. At 125 mm it is slightly larger than before, conforming to modern woofer standards. Under the trademark pointed aluminium dust cap is a thermally conductive aluminium voice coil in a powerful motor. An aluminium shorting ring in the motor structure, a modern addition, reduces distortion caused by motional variation of the voice coil inductance. The woofer has a 5 ohm DCR instead of the 7 ohms of the original.

Inspired by the original Signature version, the crossover uses low-order filters and high-quality components, balanced for domestic use rather than studio use. The braced cabinet is 18-22 mm RSC constrained-layer HDF/bitumen construction, stiffer than the usual Acoustic Energy formula, in place of the concrete-lined enclosures of the original. Both reflex ports were re-tooled with an internal flare to reduce distortion and allow more bass output. Finishes are ten layers of high gloss black paint or walnut wood veneer, with magnetic cloth grilles.

Pairing

An amplifier stable into a 6 ohm load is required. Acoustic Energy states that the new AE1 requires less amplifier power than the original.

Alternatives

The AE300² is the stand-mount loudspeaker of the Acoustic Energy 300 Series.

Spezifikationen

  • Modellbezeichnung

    AE1 40th Anniversary

  • Untere Grenzfrequenz +/- 3dB (Hz)

    50

  • Obere Grenzfrequenz +/- 3dB (Hz)

    45 000

  • Empfindlichkeit (dB at 1 W/1m)

    87

  • Impedanz (Ohms)

    6

  • Anforderungen an den Endverstärker (W)

    150

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    295 x 180 x 240

  • Gewicht (kg)

    7.0

  • Offizieller Link