Hifiverse

Kopfhörer - B&W (Bowers & Wilkins) Px8

Beschreibung, Bilder, technische Daten und Spezifikationen

B&W (Bowers & Wilkins) Px8
Bildquelle - (c) B&W (Bowers & Wilkins)

The Px8 is a wireless over-ear noise-cancelling headphone from Bowers & Wilkins, listed by the company as its flagship noise-cancelling wireless model. It was announced in June 2022 alongside the Px7 S2 and opened for orders on 28 September 2022 at USD 699. Current MSRP is USD 749, and a Px8 McLaren Edition was sold at USD 849.

Key specs that matter

Drive units are two 40 mm dynamic full-range custom carbon drivers. Bluetooth 5.2 supports the aptX Adaptive, aptX HD, aptX, AAC and SBC codecs and the A2DP, AVRCP, HFP, HSP and BLE GATT profiles. Six microphones are used, four for ANC and two for telephony. THD is below 0.1% (1 kHz/10 mW). Inputs are Bluetooth and USB-C audio. Battery life is 30 hours of playback from a rechargeable lithium-ion battery, charge time is 2 hours, and a 15-minute charge gives 7 hours. Weight is 320 g without the carry case, and the case measures 189 x 63 x 233 mm (W x D x H).

Engineering and use context

Bowers & Wilkins describes the carbon drivers as precisely angled Carbon Cone drivers, and signal processing runs on a 24-bit DSP. Noise cancellation is a hybrid system, with an Ambient Pass-Through mode for outside sound. Wear detection sensors sit in both earpieces. Lifting either earpiece pauses playback, and a headphone taken off the head enters low-power standby.

Its arms are aluminium, the earpads use memory foam under Nappa leather, and the trim has diamond-cut bright metal detailing. Up to two source devices can be paired at the same time. Over USB-C the Px8 works as a USB sound output device for a computer, and the same socket on the right earpiece takes the supplied USB-C to 3.5 mm cable for analogue sources. On the analogue input the headphone must be charged and switched on, Bluetooth disconnects, and the volume and play/pause buttons are inactive.

Media and call controls are on the right earpiece. On the left earpiece, a Quick Action button cycles between noise cancelling, Pass-Through and both off, and it can be reassigned to the phone's voice assistant. In the Bowers & Wilkins Music app there are Treble and Bass sliders, wear sensor and standby timer settings. In the box are a carry case and two 1.2 m cables, USB-C to 3.5 mm and USB-C to USB-C. Finishes include Black, Royal Burgundy, Tan and Dark Forest.

Pairing

A source device with aptX Adaptive is required for that codec, and iPhones connect over AAC. A computer connects through the supplied USB-C to USB-C cable. Any analogue headphone output works with the USB-C to 3.5 mm cable.

Alternatives

The Bowers & Wilkins Px7 S2e is an over-ear noise-cancelling model below the Px8, with 40 mm bio-cellulose drivers.

Spezifikationen

  • Modellbezeichnung

    Px8

  • Wandlerprinzip

    Dynamic

  • Bauart

    Close

  • Tragestil

    Over-ear

  • Untere Grenzfrequenz +/- 10dB (Hz)

    10

  • Obere Grenzfrequenz +/- 10dB (Hz)

    30000

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    N/A

  • Verbindungsart

    Wireless

  • Anschluss (mm)

    N/A

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    N/A

  • Impedanz (Ohm (1 kHz))

    33

  • Wiedergabedauer (hours)

    N/A

  • Gewicht (g)

    320

  • Offizieller Link