Hifiverse

Kopfhörer - B&W (Bowers & Wilkins) Pi5 S2

Beschreibung, Bilder, technische Daten und Spezifikationen

B&W (Bowers & Wilkins) Pi5 S2
Bildquelle - (c) B&W (Bowers & Wilkins)

Bowers & Wilkins designed the Pi5 S2 as in-ear true wireless earbuds with active noise cancellation. It was announced in early 2023 together with the Pi7 S2 at GBP 249 or USD 299 and replaced the original Pi5 of 2021. Of the two S2 models it is the lower-priced one, and Bowers & Wilkins now lists it among its archived products.

Key specs that matter

Each earbud has a 9.2 mm dynamic drive unit. Bluetooth is version 5.0 with aptX, and supported codecs are aptX, AAC and SBC. Profiles are A2DP 1.3.1, AVRCP 1.6.1, HFP 1.7.1, HSP 1.2 and BLE GATT. The radio operates in the 2402 - 2480 MHz ISM band with an RF output power below 10.0 dBm. There are two microphones per earbud, used for calls and noise cancellation. Battery life is up to 5 hours in the earbuds (ANC off), with an additional 19 hours from the charging case, and a 15-minute charge gives 2 hours of playback. The earbuds are rated IP54, the case is not. Each earbud weighs 6 g, the charging case weighs 47 g and measures 61 x 28 x 56 mm (W x D x H).

Engineering and use context

Pi5 S2 combines Active Noise Cancellation, Ambient Pass-Through and Wear Sensing. Wear detection sensors in both earbuds pause audio when an earbud is taken out and put it into power saving mode. All three functions are enabled and adjusted in the Bowers & Wilkins Music app for iOS and Android.

There is no power switch. Power management is automatic, the earbuds charge in the case and enter power saving mode after 5 minutes unused outside it. Each earbud has a touch-sensitive multi-function button on its top cap. Holding the left one for 1 second toggles noise cancellation, and holding the right one activates the voice assistant of the source device.

Rechargeable lithium-ion cells are used in both the earbuds and the case. The case charges by USB-C or on a wireless charging station, which is not supplied. In the box are an 800 mm USB-C to USB-C cable and small, medium and large ear tips. Finishes are Storm Grey, Cloud Grey, Spring Lilac and Sage Green.

Pairing

A Bluetooth source is required, and aptX needs a source that supports it. Up to four paired devices are stored. Android 6.0 and later devices pair through Google Fast Pair.

Alternatives

The Bowers & Wilkins Pi7 S2 is the higher true wireless model of the same generation.

Spezifikationen

  • Modellbezeichnung

    Pi5 S2

  • Wandlerprinzip

    Dynamic

  • Bauart

    Close

  • Tragestil

    TWC

  • Untere Grenzfrequenz +/- 10dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 10dB (Hz)

    N/A

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    N/A

  • Verbindungsart

    Wireless

  • Anschluss (mm)

    N/A

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    N/A

  • Impedanz (Ohm (1 kHz))

    N/A

  • Wiedergabedauer (hours)

    N/A

  • Gewicht (g)

    6 (each), 47 (case)

  • Offizieller Link