The Px7 S2e is a pair of wireless over-ear noise-cancelling headphones from Bowers & Wilkins and an updated edition of the Px7 S2. Its 24-bit DSP draws on work done for the higher Px8. The US price is USD 399, and the finishes are Anthracite Black, Cloud Grey, Forest Green, Ocean Blue and Ruby Red.
Key specs that matter
Drive units are two 40 mm dynamic full-range bio cellulose drivers, angled inside each earcup. Connection is Bluetooth 5.2 with aptX Adaptive, aptX HD, aptX, AAC and SBC codecs and the A2DP, AVRCP, HFP, HSP and BLE GATT profiles. Six microphones are used, four for noise cancellation and two for telephony. Battery life is 30 hours of playback, and a 15-minute charge gives 7 hours. Net weight is 307 g without the carry case.
Engineering and use context
Hybrid Noise Cancellation, Ambient Pass-Through and a wear-detection sensor are built in. Pass-Through lets some outside sound in, such as announcements or conversation, without the headphones being removed. Wear sensors in both earpieces pause playback when an earpiece is lifted and put the headphones into low-power standby when they are taken off. The Quick Action button on the left earpiece cycles through the noise-cancelling modes or can be assigned to the voice assistant of the connected device.
A USB-C socket on the right earpiece is used for charging and as an audio interface. Over USB, the Px7 S2e works as a USB sound output device for a computer, and the USB-C to 3.5 mm cable connects it to an analogue headphone output. The headphones must be charged and switched on for wired analogue playback. Up to two Bluetooth devices can be paired at the same time, with audio from one at a time. Treble and Bass sliders in the Bowers & Wilkins Music app adjust the tone. The earpads are memory foam with a fabric finish. In the box are a carry case and two 1.2 m cables, USB-C to USB-C and USB-C to 3.5 mm stereo jack.
Pairing
Full codec support requires a Bluetooth source with aptX Adaptive or aptX HD. Wired listening requires a USB audio output on a computer or a 3.5 mm analogue headphone output.
Alternatives
The Px8 is the higher wireless over-ear model from Bowers & Wilkins, with 40 mm carbon drivers and leather and aluminium materials.