Hifiverse

Kopfhörerverstärker - Pro-Ject Head Box S3 B

Beschreibung, Bilder, technische Daten und Spezifikationen

Pro-Ject Head Box S3 B
Bildquelle - (c) Pro-Ject

The Head Box S3 B is a fully balanced headphone amplifier from Pro-Ject Audio Systems, part of the S3 generation of the compact Box Design range. Its MSRP is EUR 399 including VAT. Line signals arrive on RCA or XLR, and both balanced and single-ended headphones connect to it. Pro-Ject makes it in Europe in silver or black.

Key specs that matter

Maximum output power from the balanced outputs is 480 mW/8 ohms, 680 mW/16 ohms, 820 mW/32 ohms and 320 mW/300 ohms. Through the unbalanced outputs the figures are 350, 400, 390 and 100 mW into the same loads. Gain is 15 dB/9 dB (RCA in/XLR in) balanced and 12 dB/6 dB unbalanced. THD is below 0.002% balanced and 0.007% unbalanced (1 kHz, 500 mV input). Signal-to-noise ratio is above 115 dB balanced and 104 dB unbalanced (A-weighted, 1 kHz), with crosstalk below -81 dB and -67 dB at 10 kHz. Frequency response is within -0.25 dB from 20 Hz to 20 kHz, and minimum recommended headphone impedance is 8 ohms. An outboard 18 V/1 A DC supply for 110 - 240 V, 50/60 Hz mains is used, and standby consumption is below 0.5 W. Dimensions are 206 x 55 x 153 mm (W x H x D), or 170 mm deep with sockets, and weight is 950 g without the power supply.

Engineering and use context

Pro-Ject keeps the signal chain fully balanced for both the RCA and the XLR input, for maximum channel separation and minimal noise. Two TPA6120A2 amplifier chips form the power stage. Pro-Ject says it set the output power deliberately and avoided excess power for its own sake.

On the front panel are four headphone sockets - 3.5 mm and 6.3 mm jacks for unbalanced headphones, and a 4.4 mm Pentaconn jack and a 4-pin XLR connector for balanced ones. Each can be used at the same time as the others, and the output power is then split between the headphones according to their impedance. Both inputs may stay connected, with an Input button choosing XLR or RCA. Volume is set with a knob on the right of the front panel, and a blue LED above the stand-by button shows that the unit is on.

A full aluminium enclosure provides mechanical stability and shielding, and all control elements and buttons are aluminium as well. An RS232 interface allows control from a custom integration system.

Pairing

A source with a fixed-level output, such as a CD player, streamer or D/A converter, is required. The RCA bypass output passes the RCA input signal untouched to an additional amplifier, while the XLR input signal is not bypassed.

Alternatives

The Head Box DS3 B is the Pro-Ject fully balanced model with a discrete amplifier design, rated at 1500 mW into 32 ohms and 560 mW into 300 ohms.

Spezifikationen

  • Modellbezeichnung

    Head Box S3 B

  • Maximale Leistung, 32 Ohm (mW RMS per channel)

    820

  • Maximale Leistung, 50 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 300 Ohm (mW RMS per channel)

    320

  • Maximale Leistung, 600 Ohm (mW RMS per channel)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Verstärkung (dBu)

    15

  • Klirrfaktor (THD) (% at 1V RMS, 300 ohms)

    >0.002

  • Signal-Rausch-Abstand (dB)

    >115

  • Intermodulationsverzerrung (IMD) (%, CCIR, 300 Ohms)

    N/A

  • Übersprechen (dB, 20Hz-20KHz, 300 Ohms)

    N/A

  • Ausgangsimpedanz (Ohms)

    >8

  • Abmessungen (mm)

    206 x 55 x 153

  • Gewicht (kg)

    0.95

  • Offizieller Link

Weitere Komponenten