The Head Box DS3 B is a fully balanced, discrete headphone amplifier from Pro-Ject Audio Systems, available from January 2026 at an MSRP of EUR 699 including VAT. It was launched together with the Head Box S3 B and sits above it in the Box Design range. Pro-Ject designs and manufactures the DS3 B in Europe, in a silver or black finish.
Key specs that matter
Maximum output power from the balanced outputs is 510 mW/8 ohms, 900 mW/16 ohms, 1500 mW/32 ohms and 560 mW/300 ohms. From the unbalanced outputs it is 620, 750, 730 and 200 mW into the same loads. Gain is 12 dB/6 dB (RCA in/XLR in) on the balanced outputs and 8 dB/2 dB on the unbalanced ones. THD is below 0.002% balanced and 0.004% unbalanced (1 kHz, 500 mV input). Signal-to-noise ratio is above 118 dB balanced and 105 dB unbalanced (A-weighted, 1 kHz), and crosstalk is below -83 dB and -68 dB at 10 kHz. Frequency response is within -0.2 dB from 20 Hz to 20 kHz. Minimum recommended headphone impedance is 8 ohms. Inputs are one pair of RCA and one pair of XLR sockets. Dimensions are 206 x 70 x 194 mm (W x H x D), or 218 mm deep with sockets, and weight is 1430 g without the power supply.
Engineering and use context
According to Pro-Ject, the signal chain is fully balanced for both the RCA and the XLR input, for maximum channel separation and minimal noise. Its power stage is a discrete amplifier design. Four headphone sockets sit on the front panel - a 3.5 mm and a 6.3 mm jack for unbalanced headphones, and a 4.4 mm Pentaconn jack and a 4-pin XLR connector for balanced ones. All outputs can be used simultaneously, and with two or more headphones connected the output power is split between them according to their impedance. Both inputs can stay connected, with the Input button selecting XLR or RCA, and a knob on the right of the front panel sets the volume.
A full aluminium chassis provides mechanical protection and shielding against electromagnetic interference, and all control elements and buttons are also aluminium. The unit runs from an outboard 18 V/1000 mA DC power supply for 110 - 240 V mains. Maximum consumption is 16 W and standby consumption is below 0.5 W. An RS232 control interface is provided for custom integration.
Pairing
A source with a fixed-level output, such as a CD player, streamer or D/A converter, is required. The rear RCA loop output passes the RCA input signal untouched to an additional amplifier, while the XLR input is not bypassed.
Alternatives
The Head Box S3 B is the lower-priced fully balanced Pro-Ject model, with a power stage of two TPA6120A2 chips rated at 820 mW into 32 ohms.