The Head Box S2 Digital from the Austrian company Pro-Ject Audio Systems is a D/A converter and headphone amplifier in one compact case. It belongs to the S2 generation of the Box Design range, where the Head Box S2 without a converter accepts analogue signals only. MSRP was EUR 329 including VAT. Pro-Ject now lists it in its archive, with the silver version still available and the black one sold out.
Key specs that matter
D/A conversion uses one ESS Sabre ESS9038Q2M 32-bit chip, and the headphone amplifier chip is an ESS9063. Digital inputs are USB B, coaxial (RCA) and optical (Toslink). Over USB the converter accepts PCM up to 32-bit/768 kHz and DSD64, DSD128 and DSD256 as DSD over PCM, while the coaxial and optical inputs accept PCM up to 24-bit/192 kHz. Outputs are a 6.3 mm headphone jack on the front and one pair of RCA pre outs at 2.05 V. Headphone output power is 68 mW/32 ohms and 6.6 mW/600 ohms, and minimum recommended headphone impedance is 8 ohms. Frequency response is 20 Hz - 20 kHz, THD is 0.0007% (0 dB, 2 V RMS, 1 kHz), dynamic range is 120 dBA and jitter is as low as 100 fs. An outboard 5 V/1 A DC supply is included. Dimensions are 103 x 37 x 122 mm (W x H x D, including knob and connectors), and weight is 360 g without the power supply.
Engineering and use context
Its clock circuitry is a Pro-Ject design, and all internal oscillators are synchronised. Noise coming in through USB is double filtered. Five digital filters are selectable on the front - Optimal Transient, a proprietary Pro-Ject filter, plus Linear Phase Fast Roll off, Linear Phase Slow Roll off, Minimum Phase Slow Roll off and Apodizing Hybrid. Filter setting and selected input are stored at power-off. Pro-Ject names organic polymer capacitors and thin film miniMELF resistors on a gold-plated four-layer PCB. An aluminium/metal sandwich casing protects against vibration and interference.
Power enters through a micro-USB socket, and the unit can also be powered from a computer over the USB input, in which case the manual recommends disconnecting the 5 V supply. When headphones are plugged in, the rear output is muted. Front LEDs show the selected input and DSD playback over USB.
Pairing
A computer connects over USB, with a driver required under Windows and none under macOS. The coaxial input takes a digital transport such as the Pro-Ject CD Box DS2 T. Its variable RCA output is a preamplifier output.
Alternatives
The Head Box DS3 B is a fully balanced, discrete Pro-Ject headphone amplifier with RCA and XLR inputs and up to 1500 mW into 32 ohms, but without a D/A converter.