Hifiverse

Vorverstärker - Octave Audio Phono Module

Beschreibung, Bilder, technische Daten und Spezifikationen

Octave Audio Phono Module
Bildquelle - (c) Octave Audio

The Phono Module is a modular phono preamplifier from Octave Audio of Germany, built by hand and individually tested. It combines solid-state and tube circuits on a universal platform in which both the input section and the output section are configured from plug-in modules. Up to three independent input boards can be installed, from MM RCA to balanced MC XLR, and an optional remote control is available.

Key specs that matter

RIAA equalisation tolerance is 0.2 dB from 10 Hz to 50 kHz. Crosstalk L to R is better than 60 dB on phono and 80 dB on line, and better than 100 dB module to module. Subsonic filter cut-off is 15 Hz (-3 dB) with a slope of 12 dB/octave. The MM RCA input has 3 - 5 mV sensitivity, 1 kohm or 47 kohms with 220 pF, and 38 dB gain. Both MC inputs (RCA and XLR) have 0.1 - 1 mV sensitivity, 60 ohms - 1 kohm with 4.7 nF and 68 or 60 dB gain. Maximum output voltage of the standard RCA output is 7 V RMS at 300 ohms. The main unit measures 437 x 83 x 487 mm (W x H x D) and weighs 7 kg, and the power supply weighs 3 kg.

Engineering and use context

Octave describes it as a four-stage system - input module, RIAA equalisation, subsonic filter and output module, with the subsonic filter bypassable. Its MC input stage is solid-state and uses professional integrated circuits, because according to Octave an all-tube input stage would be too noisy for a low-output MC cartridge. RIAA equalisation uses a three-tube stage with an ECC83 (12AX7) input tube, an ECC81 (12AT7) for the main amplification stage and an ECC88 (6922) output buffer. Octave quotes THD+N of 0.001% (weighted) for the RIAA stage at 2 V RMS output.

Further input boards include a line input with RCA and XLR, and two MC step-up transformer modules, one with fixed impedance and a gain factor of 30, the other with switchable impedance and a gain factor of 15. Output boards are the standard RCA, and the RCA and XLR Direct Drive modules with a regulated high-level output for driving a power amplifier directly. A pair of fixed RCA outputs is always present. On the balanced MC XLR input the common mode rejection ratio reaches 100 dB at 50 Hz.

The power supply is external and mounted in a magnetically shielded housing. Power Management with soft-start electronics ramps up the heater and supply voltages.

Pairing

An MM, MC or balanced MC cartridge can be connected, depending on the installed input boards. The Direct Drive output modules allow direct connection to a power amplifier.

Alternatives

The Phono EQ.2 is the simpler phono stage in the Octave range.

Spezifikationen

  • Modellbezeichnung

    Phono Module

  • Analogeingänge (symmetrisch)

    2

  • Analogeingänge (unsymmetrisch)

    2

  • Analogausgänge (symmetrisch)

    1

  • Analogausgänge (unsymmetrisch)

    1

  • Verstärkung (dBu)

    N/A

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    N/A

  • Klirrfaktor + Rauschen (THD+N) (%)

    N/A

  • Abmessungen (mm)

    437 x 83 x 487

  • Gewicht (kg)

    7

  • Offizieller Link