Hifiverse

Endstufen Stereo - Musical Fidelity M6X 250.7

Beschreibung, Bilder, technische Daten und Spezifikationen

Musical Fidelity M6X 250.7
Bildquelle - (c) Musical Fidelity

Musical Fidelity announced the M6x 250.7 on 29 September 2022 as a seven-channel class A/B power amplifier for home theatre, part of the M6 series. It is intended for a 7.1 home cinema system, with the active subwoofer powered separately. Launch price in the UK was GBP 3,099. Other M6x multichannel models are the 250.4/2, the five-channel 250.5 and the eleven-channel 250.11. A custom-made fine line aluminium extrusion forms the front panel, in black or silver.

Key specs that matter

Each of the seven channels is rated at 250 W into 4 ohms and 125 W into 8 ohms, all channels driven, with 400 W peak. THD+N is 0.003% at 100 W power output, and frequency response is 20 Hz - 20 kHz within 0.5 dB. SNR is 105 dB at 1 kHz and 200 W power output. Damping factor exceeds 300, and crosstalk is above 80 dB from 20 Hz to 20 kHz. Input sensitivity is 700 mV (RCA) and 1.4 V (XLR). On the rear are seven line-level RCA inputs, seven balanced XLR inputs, seven RCA through outputs, seven pairs of speaker terminals and a trigger input and output. Dimensions are 450 x 195 x 435 mm (W x H x D) and weight is 32.5 kg, or about 35 kg in the shipping carton. Maximum consumption is 2000 W, below 0.5 W in standby.

Engineering and use context

Its construction is modular, with one 250 W class A/B amplifier stage for every channel. A transformer that Musical Fidelity calls a super silent audiophile power transformer supplies the stages. Because of the heat sink design the M6x 250.7 has no fan and no active cooling elements.

Inputs are one gold-plated RCA and one balanced XLR per channel. Through the gold-plated RCA through output the same signal goes on to another input or to another power amplifier, for example for bi-amping. Gold-plated, isolated speaker terminals accept 4 mm banana plugs, spade connectors or bare wire. The front panel has a power/standby button and status LEDs for each channel - blue for ready, red for a fault condition (overheating, short circuit, DC on the outputs) and dimmed red for standby. With 5-30 V from an external source at the trigger input, the amplifier switches on. Mains voltage is 230 V or 115 V, internally set, with 100 V optional, AC 50/60 Hz.

Pairing

An AV processor with seven pre-outs in RCA or XLR form is required. Musical Fidelity recommends the XLR connection whenever the preamplifier has XLR outputs. A separately powered subwoofer is required for the LFE channel.

Alternatives

The M6x 250.5 is the five-channel version in Musical Fidelity's M6x range.

Spezifikationen

  • Modellbezeichnung

    M6X 250.7

  • Eingangsempfindlichkeit (mV)

    700 RCA, 1400 XLR

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    N/A

  • Ausgangsleistung (4Ω) (W)

    7 x 250

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Signal-Rausch-Abstand (dB)

    105

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    0,003

  • Maximale Leistungsaufnahme (W)

    2500

  • Dämpfungsfaktor

    >300

  • Abmessungen (mm)

    450 x 195 x 435

  • Gewicht (kg)

    32.5

  • Offizieller Link