The M6x 250.11 is an 11-channel class A/B power amplifier in the M6 series from Musical Fidelity. It is intended for a Dolby Atmos home cinema system, with the active subwoofer powered separately. Four M6x multichannel power amplifiers are offered - the 250.4/2, 250.5, 250.7 and this 250.11. Its front panel is a custom-made fine line aluminium extrusion in black or silver.
Key specs that matter
Output is split into two groups. The three main channels (C, LF, RF) are rated at 250 W into 4 ohms and 125 W into 8 ohms with all channels driven, and 400 W peak. Each of the eight effect channels is rated at 150 W into 4 ohms and 75 W into 8 ohms, with 250 W peak. THD+N of the main channels is 0.003% at 100 W power output, and frequency response is 20 Hz - 20 kHz within 0.5 dB. SNR is 105 dB on the main channels and 103 dB on the effect channels, both at 1 kHz and 200 W power output. Damping factor is above 300 for the main channels and 80 for the effect channels. Input sensitivity is 700 mV at the RCA inputs and 1.4 V at the XLR inputs. Dimensions are 435 x 205 x 430 mm (W x H x D), and weight is 35.5 kg, about 39 kg in the shipping carton. Maximum consumption is 3000 W, under 0.5 W in standby.
Engineering and use context
Construction is modular, with one class A/B amplifier stage per channel - 250 W stages for the main channels and 150 W stages for the effect channels. Musical Fidelity names the transformer a super silent audiophile power transformer. Thanks to the heat sink design there is no fan and no other active cooling element.
Every channel is equipped with a gold-plated RCA input as well as a balanced XLR input. The 11 pairs of gold-plated, isolated speaker terminals accept spade connectors, 4 mm banana plugs or naked wire. A trigger input and output switch the unit on and off with other components, and the unit turns on when an external source applies 5-30 V to the trigger input. Status LEDs for each channel are blue when the amplifier is ready, red for a fault condition (overheating, short circuit, DC on the outputs) and dimmed red in standby. Mains voltage is 230 V or 115 V, set internally, or 100 V as an option, AC 50/60 Hz.
Pairing
An AV processor or preamplifier with 11 pre-outs in RCA or XLR form is required. Musical Fidelity recommends the balanced XLR connection whenever the preamplifier has XLR outputs. The main channels are assigned to the centre, left front and right front speakers, and the LFE channel needs a separately powered subwoofer.
Alternatives
The M6x 250.7 is Musical Fidelity's seven-channel version, with 250 W into 4 ohms on every channel.