Hifiverse

Endstufen Stereo - Musical Fidelity M6X 250.5

Beschreibung, Bilder, technische Daten und Spezifikationen

Musical Fidelity M6X 250.5
Bildquelle - (c) Musical Fidelity

The M6x 250.5 is a five-channel class A/B power amplifier in Musical Fidelity's M6 series, intended for a 5.1 home cinema system in which the active subwoofer is powered separately. Musical Fidelity's M6x multichannel family also includes the 250.4/2, the seven-channel 250.7 and the eleven-channel 250.11. Its front panel is a custom-made fine line aluminium extrusion, finished in black or silver.

Key specs that matter

All five channels have identical ratings - 250 W into 4 ohms and 125 W into 8 ohms with all channels driven, and 400 W peak per channel. THD+N is 0.003% at 100 W power output. Frequency response is 20 Hz - 20 kHz within 0.5 dB, and SNR is 105 dB at 1 kHz and 200 W power output. Damping factor is above 300, and crosstalk is better than 80 dB from 20 Hz to 20 kHz. Input sensitivity is 700 mV at the RCA inputs and 1.4 V at the XLR inputs. Connections are five line-level RCA inputs, five balanced XLR inputs, five line-level RCA through outputs, five pairs of speaker terminals and one trigger input and output. The chassis measures 435 x 195 x 430 mm (W x H x D) and weighs 30.5 kg, about 34 kg in the shipping carton. Maximum consumption is 1500 W, and standby consumption is 0.5 W.

Engineering and use context

Musical Fidelity builds the amplifier as a modular design with one 250 W class A/B amplifier stage per channel. Power comes from what the company calls a super silent audiophile power transformer. Owing to the heat sink design, the M6x 250.5 needs no fan, and it has no active cooling elements.

Each channel carries a gold-plated RCA input and a balanced XLR input. Its gold-plated RCA through output passes the same signal on to another input, and Musical Fidelity names bi-amping as the use, either with a second amplifier module or with another power amplifier. Speaker terminals are gold-plated and isolated and accept 4 mm banana plugs, spade connectors or bare wire. With the trigger input and output the unit is switched on and off by other components, and it turns on when 5-30 V is present at the trigger input. On the front, per-channel status LEDs show blue for ready, red for a fault (overheating, short circuit, DC on the outputs) and dimmed red for standby. Mains voltage is set internally to 230 V or 115 V, with 100 V optional, AC 50/60 Hz.

Pairing

An AV processor or preamplifier with five pre-outs is required. When the processor has XLR outputs, Musical Fidelity recommends the balanced connection. The LFE channel needs a separately powered subwoofer.

Alternatives

The M6x 250.7 from Musical Fidelity has seven channels with the same 250 W rating into 4 ohms.

Spezifikationen

  • Modellbezeichnung

    M6X 250.5

  • Eingangsempfindlichkeit (mV)

    700 RCA, 1400 XLR

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    N/A

  • Ausgangsleistung (4Ω) (W)

    5 x 250

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Signal-Rausch-Abstand (dB)

    105

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    0,003

  • Maximale Leistungsaufnahme (W)

    1500

  • Dämpfungsfaktor

    >300

  • Abmessungen (mm)

    435 x 195 x 430

  • Gewicht (kg)

    30.5

  • Offizieller Link