The Kora TB400 is an integrated tube hybrid amplifier from Kora, designed and built in Toulouse in the Occitania region of France. Kora describes it as the big brother of the TB200, with more filtering, bigger transformers and more output transistors. It sits at the top of the brand's class AB integrated range above the TB140 and TB200, and the TA480 power amplifier is its non-integrated version.
Key specs that matter
Output power is 2 x 200 W into 8 ohms and 2 x 360 W into 4 ohms. Bandwidth is 20 Hz - 20 kHz (±1 dB), and output impedance is below 0.08 ohm. There are four RCA line inputs with 15 kOhm input impedance and 1 V input sensitivity, plus a pre-out with 2 kOhm output impedance. The chassis alone measures 130 x 420 x 420 mm, overall dimensions are 148 x 420 x 450 mm, and weight is 27 kg. Maximum power input is 1,010 VA at 2 x 360 W into 4 ohms.
Engineering and use context
Like the rest of the Kora range, the TB400 is built on the Square Tube operational amplifier, with four triodes per channel. According to Kora, the Square Tube provides all amplification and control of the audio signal, and its output voltage is the one applied to the speaker outputs. Complementary power transistors supply the current the loudspeakers require without taking part in voltage amplification, a role Kora compares to that of an output transformer. Kora states that this combination has no low- or high-frequency phase shifts and no current limitation, and that the amplifier stays stable into complex loads.
The output stage uses 20 complementary highly linear ON Semi power transistors rated at 225 W and 15 A each. Its dual power supply uses two 500 VA transformers, 2 x 100,000 µF of main filtering and internal rails of 2 x ±65 V DC. The high-voltage supply is stabilised at +300 V and -200 V, and both input and output tube heaters run on regulated 12 V DC. Input 4 can be configured as a bypass input, turning the TB400 into a power amplifier, or as a variable pre-out after the volume control. Balance and the offset of each input are adjustable. The aluminium and steel case is finished in Mineral grey, a metal remote control is supplied, and the warranty runs for five years.
Pairing
Loudspeakers with a 4 ohm nominal impedance are within its rated load. Its bypass input allows integration with a home-theatre processor, and the configurable pre-out allows an active subwoofer.
Alternatives
The Kora TB200 is the smaller integrated amplifier in the same range, rated at 2 x 100 W into 8 ohms.