Hifiverse

Vollverstärker - Kora TB140

Beschreibung, Bilder, technische Daten und Spezifikationen

Kora TB140
Bildquelle - (c) Kora

The TB140 is an integrated tube hybrid amplifier from Kora, designed and built in Toulouse in the Occitania region of France. Kora calls it its first model. It is the smallest of the brand's three class AB integrated amplifiers, below the TB200 and TB400, and the only one of them with a phono input. In France it sells for EUR 5,640.

Key specs that matter

Output power is 2 x 70 W into 8 ohms and 2 x 100 W into 4 ohms. Four RCA line inputs have 15 kOhm input impedance and 1 V sensitivity. Input 5 is a phono MM input with 47 kOhm input impedance, 4 mV sensitivity and RIAA equalisation. A pre-out with 2 kOhm output impedance is taken after the volume setting. Bandwidth is 20 Hz - 20 kHz (±1 dB), and output impedance is below 0.08 ohm. Overall dimensions are 118 x 420 x 370 mm, the chassis alone is 100 x 420 x 340 mm, and weight is 9.5 kg. Maximum power consumption is 210 W at 2 x 70 W into 8 ohms and 310 VA at 2 x 100 W into 4 ohms, on 230 V mains (117 V on request).

Engineering and use context

Like every Kora amplifier, the TB140 is powered by the Square Tube operational amplifier, with four triodes per channel. Kora states that the Square Tube provides all amplification and control of the signal, and its output voltage is the one applied to the speaker outputs. Four complementary highly linear ON Semi power transistors, rated 225 W and 15 A each, supply the current the loudspeakers require without taking part in amplification. Kora compares them to an output transformer, but without low- and high-frequency phase shifts or current limitation, and quotes stability into complex loads.

Its dual power supply has a 300 VA toroidal transformer, two 10 VA auxiliary transformers, 2 x 44,000 µF of main filtering and internal rails of 2 x ±44 V DC. High voltage is stabilised at +250 V and -165 V. Input tube heaters run on regulated 12 V DC, output tube heaters on 12 V AC. On this model the main switch is on the back panel next to the mains socket, and a pre-charge circuit is built in. A micro-controller monitors the voltages during start-up, then restores the previous input, balance, volume and offset. Level runs from 00 to 80 on the single front knob, balance covers ±10 steps, and each input has its own gain offset. The case is aluminium and steel in Mineral grey, with a five-year warranty.

Pairing

A turntable with an MM cartridge connects directly to input 5. An MC cartridge requires an external phono stage. The pre-out allows a power amplifier or an active subwoofer.

Alternatives

The Kora TB200 is the next integrated amplifier up, rated at 2 x 100 W into 8 ohms, with line inputs only.

Spezifikationen

  • Modellbezeichnung

    TB140

  • Typ

    Integrated Amplifier

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    4 + 1 (Phono)

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    15 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    2000

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    47 000 (MM)

  • Ausgangsleistung (8Ω) (W)

    2 x 70

  • Ausgangsleistung (4Ω) (W)

    2 x 100

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    118 x 420 x 370

  • Gewicht (kg)

    9.5

  • Offizieller Link

Weitere Komponenten