Hifiverse

Vollverstärker - Line Magnetic Audio LM-216IA Plus

Beschreibung, Bilder, technische Daten und Spezifikationen

Line Magnetic Audio LM-216IA Plus
Bildquelle - (c) Line Magnetic Audio

The LM-216IA PLUS is a stereo integrated tube amplifier from Line Magnetic Audio, the Chinese company founded in 2005 by two brothers who began by rebuilding and reproducing Western Electric, Altec and Jensen equipment. It is the updated version of the LM-216IA, with four KT88 output tubes in class AB push-pull. In Europe both versions are priced at EUR 1,599.

Key specs that matter

Power output is 45 W + 45 W (class AB push-pull). Tube complement is 2x 12AU7, 2x 6H6π and 4x KT88. Frequency response is 10 Hz - 50 kHz (-1.5 dB), THD is 1% (1 kHz), and S/N ratio is 87 dB. Input sensitivity is 340 mV, with an input impedance of 100 kohms. Output impedance taps are 4 and 8 ohms. Power consumption is 240 W. Dimensions are 376 x 345 x 191.5 mm (W x D x H), and net weight is 19.6 kg.

Engineering and use context

Each channel has two KT88 in push-pull. Ahead of them the PLUS uses two 12AU7 and two 6H6π tubes. The standard LM-216IA has a different small-signal line-up, with two 12AX7 and two 12BH7 tubes.

On the standard LM-216IA, a triode/ultra-linear switch selects between 22 W per channel in triode mode and 38 W per channel in ultra-linear mode. Input sensitivity is also different - 340 mV for the PLUS against 220 mV for the standard model.

Both versions share the same case and mass. The standard LM-216IA measures 376 x 192 x 345 mm (W x H x D) and also weighs 19.6 kg. It has four RCA line inputs, 4 and 8 ohm output groups and a rear-illuminated bias meter on the front panel, with an ALPS volume control, Realcap capacitors and hand-made point-to-point wiring inside.

Pairing

A line-level source is required. Loudspeakers connect to the 4 or 8 ohm tap that matches their nominal impedance.

Alternatives

The LM-211IA is the Line Magnetic push-pull integrated tube amplifier with four EL34 output tubes and switchable triode and ultra-linear operation.

Spezifikationen

  • Modellbezeichnung

    LM-216IA Plus

  • Typ

    Tube Integrated Amplifier

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    2

  • Eingangsempfindlichkeit (mV)

    340

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    100 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    45 + 45

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    50 000

  • Signal-Rausch-Abstand (dB)

    87

  • Klirrfaktor + Rauschen (%)

    1

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    376 x 345 x 191.5

  • Gewicht (kg)

    19.6

  • Offizieller Link