Hifiverse

Vollverstärker - Line Magnetic Audio LM-211IA

Beschreibung, Bilder, technische Daten und Spezifikationen

Line Magnetic Audio LM-211IA
Bildquelle - (c) Line Magnetic Audio

The LM-211IA is a stereo integrated tube amplifier from Line Magnetic Audio, the company founded in 2005 by two brothers whose early work was rebuilding and reproducing Western Electric, Altec and Jensen designs. Four EL34 output tubes work in class AB push-pull, and a front-panel switch selects triode or ultra-linear operation. In Europe it lists at EUR 1,599, the same price as the KT88-based LM-216IA Plus.

Key specs that matter

Power output is 15 W + 15 W RMS in triode mode and 32 W + 32 W RMS in ultra-linear mode. Tube complement is 2x 12AX7, 2x 12AU7 and 4x EL34. Frequency response is 10 Hz - 50 kHz (±1.5 dB), THD is 1% (1 kHz), and S/N ratio is 88 dB (A-weighted). Input sensitivity is 200 mV, with an input impedance of 100 kohms. Output impedance taps are 4 and 8 ohms. Power consumption is 230 W from a 230 V ±5% (50 Hz) supply. Dimensions are 376 x 191.5 x 345 mm (W x H x D), net weight is 19.6 kg, and the working temperature range is 0 to 40°C.

Engineering and use context

Its input stage uses two 12AX7 and two 12AU7 tubes, and the power stage has four EL34. Line Magnetic lists the 6CA7 as a common replacement for the EL34. In the manufacturer's words, triode mode can be chosen when the power of the ultra-linear mode is not needed.

Four line inputs on RCA sockets are labelled CD, LINE 1, LINE 2 and LINE 3, and a selector on the right of the front panel chooses between them. Speakers connect to screw terminals that also take banana plugs. Two wide-bandwidth EI output transformers are used, and the EI power transformer is specially designed for this amplifier. Line Magnetic says the circuit is wired in the air for the most part, by hand, point to point. An ALPS volume potentiometer and Realcap capacitors are used.

Output tube bias is user-adjustable. On the top plate, BIAS ADJ. screws adjust tubes V1 and V2 and tubes V3 and V4, and a small Bias Current lever per pair selects which tube appears on the ampere meter. The meter is rear-illuminated and sits on the front panel, and all four EL34 are set to the same current. A soft start and time-delay circuit holds the amplifier for 30 seconds, during which the orange front LED blinks. A removable metal cage covers the tubes, and the main fuse is below the power cord socket. The LM-02 infrared remote control sets volume and mute. Two fuses, a detachable power cord and a manual are also in the box.

Pairing

All four inputs are line level. A turntable requires an external phono stage. Loudspeakers connect to the 4 or 8 ohm tap that matches their nominal impedance.

Alternatives

The LM-34IA is another Line Magnetic EL34 push-pull integrated tube amplifier, rated at 40 W per channel in class AB.

Spezifikationen

  • Modellbezeichnung

    LM-211IA

  • Typ

    Tube Integrated Amplifier

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    3 + 1 (CD)

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    100 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    15 + 15 (RMS Triode), 32 + 32 (RMS Ultralinear)

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    50 000

  • Signal-Rausch-Abstand (dB)

    88

  • Klirrfaktor + Rauschen (%)

    1

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    376 x 345 x 191.5

  • Gewicht (kg)

    19.6

  • Offizieller Link