Hifiverse

Vollverstärker - Luxman L-509X

Beschreibung, Bilder, technische Daten und Spezifikationen

Luxman L-509X
Bildquelle - (c) Luxman

The L-509X is an integrated amplifier from Luxman of Japan that brings the features of a separate preamplifier and power amplifier into one chassis, a goal Luxman set with the L-509fSE in 2002. Luxman calls the result separates in a single unit. It combines the New LECUA1000 attenuator and a discrete buffer circuit from the C-900u control amplifier with an output stage similar to that of the M-700u power amplifier. The L-509X is now discontinued.

Key specs that matter

Rated output is 120 W + 120 W (8 ohms) and 220 W + 220 W (4 ohms) from a bipolar 4-parallel push-pull output stage, and damping factor is 370. THD is 0.007% or less (8 ohms, 1 kHz) and 0.06% or less (8 ohms, 20 Hz - 20 kHz). S/N ratio (IHF-A) is 105 dB for line, 91 dB for MM and 75 dB for MC. Input sensitivity and impedance are 2.5 mV/47 kilohms (MM), 0.3 mV/100 ohms (MC), 180 mV/47 kilohms (line), 180 mV/55 kilohms (balanced line) and 1.1 V/47 kilohms (main in). Line response is 20 Hz - 100 kHz (-3 dB), phono response 20 Hz - 20 kHz (±0.5 dB), and bass and treble adjust by ±8 dB. Dimensions are 440 x 193 x 463 mm (W x H x D) and weight is 29.3 kg.

Engineering and use context

ODNF (Only Distortion Negative Feedback) returns only the distorted components of the signal from the output of the amplification circuit. Version 4.0 uses a triple-paralleled first stage error detection circuit, and a paralleled first stage with a Darlington second stage lowers impedance and raises the signal-to-noise ratio. A 3-stage Darlington circuit precedes the 4-parallel push-pull output stage.

In the preamplifier section the New LECUA1000, an 88-step computerized attenuator, is integrated with the amplification circuit, as in the C-900u. Its attenuator board connects directly to the amplification board in a 3D layout, and LECUA also governs the balance control. Power comes from a 600 VA EI-core transformer with independent left and right blocking capacitors, four 10,000 µF units per channel.

Large low-resistance speaker relays are connected in parallel, and 3.5 mm2 cable runs from the amplifier board outputs. Amplifier boards are crack-resistant peel coat PCBs with Luxman's Beeline wiring pattern, inside a loop-less chassis. LINE-1 has copper alloy RCA terminals. Also built in are an MM/MC phono amplifier, tone controls, a pre/power separation function and a headphone output, and the RA-17A remote is supplied.

Pairing

A turntable with an MM or MC cartridge connects to the phono input directly. Pre out and main in allow the pre and power sections to be used separately. The speaker terminals accept Y-lugs.

Alternatives

The L-509Z is Luxman's Z-series flagship integrated amplifier, with LIFES in both the preamplifier and power amplifier sections and the same 120 W into 8 ohms rating.

Spezifikationen

  • Modellbezeichnung

    L-509X

  • Typ

    Integrated Amplifier with Phono

  • Analogeingänge (symmetrisch)

    2

  • Analogeingänge (unsymmetrisch)

    4 + 1 (Phono)

  • Eingangsempfindlichkeit (mV)

    180

  • Eingangsimpedanz (symmetrisch) (Ω)

    55 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    47 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    47 000 (MM) + 100 (MC)

  • Ausgangsleistung (8Ω) (W)

    120

  • Ausgangsleistung (4Ω) (W)

    220

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    100 000

  • Signal-Rausch-Abstand (dB)

    105

  • Klirrfaktor + Rauschen (%)

    0.06

  • Dämpfungsfaktor

    370

  • Abmessungen (mm)

    440 x 193 x 463

  • Gewicht (kg)

    29.3

  • Offizieller Link

Weitere Komponenten