Hifiverse

Vollverstärker - Luxman L-505Z

Beschreibung, Bilder, technische Daten und Spezifikationen

Luxman L-505Z
Bildquelle - (c) Luxman

The L-505Z is an integrated amplifier from Luxman of Japan, designed in honour of the original L-505 and completing the Z series below the L-507Z and L-509Z. Like both of them, it is equipped with the LIFES amplification feedback engine. An MM/MC phono stage, the LECUA electronically controlled attenuator and a pair of needle-type VU meters are built in.

Key specs that matter

Rated output is 100 W + 100 W (8 ohms) and 150 W + 150 W (4 ohms) in class AB from a bipolar parallel push-pull output stage. Damping factor is 200. THD is 0.009% or less (8 ohms, 1 kHz) and 0.09% or less (8 ohms, 20 Hz - 20 kHz). S/N ratio (IHF-A) is 104 dB for line, 87 dB for MM and 70 dB for MC. Input sensitivity and impedance are 2.5 mV/47 kilohms (MM), 0.3 mV/100 ohms (MC), 180 mV/47 kilohms (line), 180 mV/55 kilohms (balanced line) and 1 V/47 kilohms (main in), and pre out level is 1 V. Line response is 20 Hz - 100 kHz (-3 dB), phono response 20 Hz - 20 kHz (±0.5 dB). Bass and treble adjust by ±8 dB at 100 Hz and 10 kHz. Power consumption is 330 W, 90 W with no signal. Dimensions are 440 x 178 x 454 mm (W x H x D) and weight is 22.5 kg.

Engineering and use context

LIFES (Luxman Integrated Feedback Engine System) is based on the concept of Luxman's ODNF circuit, and none of the input signal is fed back to the main amplifier. In Version 1.0 the circuit was reconstructed and simplified with fewer parallel elements, and Luxman quotes distortion during amplification at less than half of the previous design.

Volume is set by LECUA in solid-state (IC) form, in 88 steps, and its volume shift function also provides the balance control. At the preamplifier output sits discrete buffer circuitry with high current supply capability. The phono EQ circuit has a parallelized first stage. Power comes from a 540 VA EI-type transformer with four custom 10,000 µF filter capacitors.

Of the two headphone outputs, 6.3 mm and 4.4 mm, the 4.4 mm terminal has independent left and right ground wiring with separate unbalanced amplifiers. Tone controls, loudness and a separate function for bi-amping are included. Internal wiring is OFC cable with spiral wrap shielding, inside a loop-less chassis. The RCA terminals are at 18 mm pitch, and the RA-17A remote is supplied.

Pairing

A turntable with an MM or MC cartridge connects to the phono input directly. Its separate function and main in allow bi-amping with an additional power amplifier. The in-line speaker terminals accept Y-lugs and banana plugs.

Alternatives

The L-507Z is the next Z-series integrated amplifier, with a bipolar 3-parallel push-pull output stage rated at 110 W into 8 ohms.

Spezifikationen

  • Modellbezeichnung

    L-505Z

  • Typ

    Integrated Amplifier with Phono

  • Analogeingänge (symmetrisch)

    1

  • Analogeingänge (unsymmetrisch)

    4 + 1 (Phono)

  • Eingangsempfindlichkeit (mV)

    180

  • Eingangsimpedanz (symmetrisch) (Ω)

    55 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    47 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    47 000 (MM) + 100 (MC)

  • Ausgangsleistung (8Ω) (W)

    100

  • Ausgangsleistung (4Ω) (W)

    150

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    100 000

  • Signal-Rausch-Abstand (dB)

    104

  • Klirrfaktor + Rauschen (%)

    0.09

  • Dämpfungsfaktor

    200

  • Abmessungen (mm)

    440 x 178 x 454

  • Gewicht (kg)

    22.5

  • Offizieller Link

Weitere Komponenten