Hifiverse

Vollverstärker - Luxman L-507Z

Beschreibung, Bilder, technische Daten und Spezifikationen

Luxman L-507Z
Bildquelle - (c) Luxman

The L-507Z is an integrated amplifier from Luxman of Japan and the debut model of its new-generation Z series. It introduced LIFES, the amplification feedback engine that succeeds the ODNF circuit Luxman had used since 1999, ahead of the company's 100th anniversary in 2025. A newly developed MM/MC phono amplifier, the New LECUA1000 attenuator and backlit VU meters are built in.

Key specs that matter

Rated output is 110 W + 110 W (8 ohms) and 220 W + 220 W (4 ohms) in class AB from a bipolar 3-parallel push-pull output stage. Damping factor is 300. THD is 0.007% or less (8 ohms, 1 kHz) and 0.03% or less (8 ohms, 20 Hz - 20 kHz). S/N ratio (IHF-A) is 105 dB for line, 91 dB for MM and 75 dB for MC. Input sensitivity and impedance are 2.5 mV/47 kilohms (MM), 0.3 mV/100 ohms (MC), 180 mV/47 kilohms (line), 180 mV/79 kilohms (balanced line) and 1.05 V/47 kilohms (main in). Line response is 20 Hz - 100 kHz (-3 dB). Power consumption is 350 W, 86 W with no signal. The chassis measures 440 x 178 x 454 mm (W x H x D) and weighs 25.4 kg.

Engineering and use context

LIFES (Luxman Integrated Feedback Engine System) is based on the ODNF concept, and none of the original input signal is fed back to the main amplifier. In Version 1.0 the number of paralleled elements was reduced, and Luxman states that distortion in the amplification stage is less than half that of its previous system. Each channel has a 3-stage Darlington, triple-paralleled push-pull output stage.

Volume is set by the New LECUA1000, an 88-step electronically controlled attenuator integrated into the amplifier circuit, and discrete buffer circuitry sits at the preamplifier output. A custom EI-type power transformer and eight 10,000 µF filter capacitors make up the power supply. Large low-resistance speaker relays are connected in parallel, and OFC wire runs directly to the speaker terminals.

On the rear panel, LINE-1 has copper alloy RCA terminals at 20 mm pitch, while LINE-2, 3 and 4 are at 18 mm pitch. Headphone outputs are 6.3 mm and 4.4 mm, the latter with independent left and right ground wiring. Tone controls, balance, loudness, a mute button and a separate function that uncouples the pre and power sections are included. Luxman uses Beeline construction and a loop-less chassis structure. Its cast iron feet have a density gradient that decreases from the centre to the periphery.

Pairing

A turntable with an MM or MC cartridge connects to the phono input directly. The separate function, pre out and main in allow the pre and power sections to be used independently.

Alternatives

The L-509Z is the Z-series flagship, with LIFES in both the preamplifier and power amplifier sections and a 4-parallel push-pull output stage rated at 120 W into 8 ohms.

Spezifikationen

  • Modellbezeichnung

    L-507Z

  • Typ

    Integrated Amplifier with Phono

  • Analogeingänge (symmetrisch)

    2

  • Analogeingänge (unsymmetrisch)

    4 + 1 (Phono)

  • Eingangsempfindlichkeit (mV)

    180

  • Eingangsimpedanz (symmetrisch) (Ω)

    79 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    47 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    110

  • Ausgangsleistung (4Ω) (W)

    220

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    100 000

  • Signal-Rausch-Abstand (dB)

    105

  • Klirrfaktor + Rauschen (%)

    0.03

  • Dämpfungsfaktor

    350

  • Abmessungen (mm)

    440 x 178 x 454

  • Gewicht (kg)

    25.4

  • Offizieller Link

Weitere Komponenten