Hifiverse

Vollverstärker - Accuphase E-3000

Beschreibung, Bilder, technische Daten und Spezifikationen

Accuphase E-3000
Bildquelle - (c) Accuphase

The E-3000 is a Class AB integrated stereo amplifier from Accuphase Laboratory of Japan. Accuphase calls it the next-generation standard model, born from integrating the E-280 and the E-380 of its entry-level E-200 and E-300 series. Many technologies developed for the higher Accuphase models are carried over. Its American retail price is USD 8,975.

Key specs that matter

Rated output is 100 W/ch into 8 ohms and 150 W/ch into 4 ohms, both channels driven, 20 Hz - 20 kHz. Total harmonic distortion is 0.05% (4 - 16 ohms, at rated output) and intermodulation distortion is 0.01%. The guaranteed damping factor is 600, which Accuphase gives as 20% above the 500 of the E-280 and E-380. Inputs are five sets of unbalanced line inputs and one balanced input, with pre out and main in connectors. The chassis measures 465 x 161 x 422 mm (W x H x D) and weighs 23.1 kg.

Engineering and use context

Volume is set by AAVA (Accuphase Analog Vari-gain Amplifier), a principle with no variable resistors in the signal path. In the E-3000 the AAVA module has five paralleled buffer amplifiers and a lower-impedance V to I converter, and its I-V converter uses ANCC (Accuphase Noise and distortion Canceling Circuit). Accuphase quotes 20% lower noise than the E-380 at the nine o'clock volume position. The buffer amplifiers sit close to the input jacks to reduce induced noise.

Each power amplification stage is configured as an instrumentation amplifier with current feedback topology. Its output stage uses three-fold parallel push-pull bipolar power transistors rated at 15 A and 230 V, driven in Class AB. Balanced remote sensing takes both signal and GND feedback from points next to the speaker terminals. Inside, the mono-block layout places a custom transformer and two 33,000 µF/71 V filtering capacitors in the centre, with separate left and right power amplifier modules.

Speaker protection uses MOS-FET switches with 1.6 milliohm on-resistance instead of mechanical relays. Photo-couplers and heatsink temperature sensors cut the speaker output and make the power meters flash when a fault occurs. Tone controls use summing active filters, and the unit stands on high-carbon cast iron insulators. Two rear slots take option boards such as the DAC-60 digital input board and the AD-60 phono board, which has 66 dB gain for MC and 40 dB for MM and MC input impedances of 30, 100, 200 and 300 ohms. Per Accuphase, it is the smallest Class AB integrated in its lineup yet heavier than the E-380.

Pairing

Two pairs of large speaker terminals are provided. The PRE OUT allows bi-amping with a second power amplifier. A turntable requires the optional AD-60 board.

Alternatives

The Accuphase E-4000 is another integrated amplifier in the Accuphase lineup.

Spezifikationen

  • Modellbezeichnung

    E-3000

  • Typ

    N/A

  • Analogeingänge (symmetrisch)

    1

  • Analogeingänge (unsymmetrisch)

    5

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    2 x 100

  • Ausgangsleistung (4Ω) (W)

    2 x 150

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    N/A

  • Dämpfungsfaktor

    600

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten