The Accuphase E-4000 is a Class AB integrated stereo amplifier and the successor of the E-480, the 12th generation of the company's high-power integrated models. Accuphase, founded in Yokohama in 1972, builds its components in Japan. The E-4000 is derived from the brand's separate preamplifier and power amplifier technology and has a mono-block layout with separate left and right power amplifier modules.
Key specs that matter
Rated output is 180 W per channel into 8 ohms and 260 W into 4 ohms (music signals), both channels driven, 20 - 20,000 Hz. THD is 0.05% (4 - 16 ohms) and IMD 0.01%. Frequency response is 3 - 150,000 Hz (0, -3.0 dB) at 1 W via MAIN IN. Damping factor is 800. S/N ratio at rated output is 102 dB balanced, 109 dB line and 125 dB via MAIN IN. Gain is 18 dB from input to pre out and 28 dB from MAIN IN to the speaker output. Inputs are five line and two balanced, plus a recorder loop. Dimensions are 465 x 181 x 428 mm (W x H x D), and weight is 24.9 kg.
Engineering and use context
Volume is set by AAVA (Accuphase Analog Vari-gain Amplifier), a principle that removes variable resistors from the signal path. AAVA produces several weighted signals from the input and controls level by changing their combination. Its I-V converter amplifier uses ANCC, a topology that adds a sub-amplifier with a noise density of 1.5 nV/√Hz to cancel noise in the main amplifier. Six paralleled buffer amplifiers sit close to the input jacks, and Accuphase specifies 20% lower noise than the E-480.
In the power amplifier section the instrumentation amplifier principle is used with balanced transmission. Each channel has four parallel push-pull pairs of bipolar transistors in Class AB, in the same circuit configuration as the P-7500 power amplifier, with current feedback and balanced remote sensing. Damping factor is 33% higher than that of the E-480. A specially made toroidal transformer and two 40,000 µF/80 V filtering capacitors form the power supply, and protection uses MOS-FET switches.
Bass and treble controls (±10 dB) with summing active filters, a loudness compensator, a -20 dB attenuator, a headphone amplifier and power meters reading to -50 dB are included. Two rear slots accept option boards such as the DAC-60 or the AD-50 phono stage for MM and MC. The RC-250 remote is supplied.
Pairing
Headphones of 8 ohms or higher are supported. Balanced and line pre outs allow bi-amping with a second power amplifier of equal gain.
Alternatives
The Accuphase E-5000 is the higher-powered Class AB integrated model, rated at 240 W per channel into 8 ohms.