Hifiverse

Vollverstärker - NAD C 379

Beschreibung, Bilder, technische Daten und Spezifikationen

NAD C 379
Bildquelle - (c) NAD

The NAD C 379 HybridDigital DAC Amplifier is a Classic Series stereo integrated amplifier with an ESS SABRE DAC, a moving-magnet phono stage, an HDMI eARC input and two MDC2 upgrade slots.

Key specs that matter

Continuous power is 80 W per channel into 8 or 4 ohms (20 Hz - 20 kHz, both channels driven), with THD below 0.03% from 250 mW to 120 W. Clipping power is above 110 W (1 kHz, 0.1% THD). IHF dynamic power is 140 W into 8 ohms, 250 W into 4 ohms and 260 W into 2 ohms, and peak output current exceeds 20 A (1 ohm, 1 ms). In bridge mode the amplifier delivers over 300 W into 8 ohms. Damping factor is above 300 (8 ohms, 20 Hz - 6.5 kHz). Line input sensitivity for 80 W is 440 mV, and line input impedance is 56.2 kohms + 100 pF. At the pre-out, signal-to-noise ratio is above 106 dB (IHF, A-weighted, unity gain), THD is below 0.002% at 2 V, and output impedance is source impedance plus 320 ohms. MM phono sensitivity is 4.2 mV at an input impedance of 46 kohms / 100 pF. Digital inputs accept up to 24-bit/192 kHz. Dimensions are 435 x 100 x 410 mm (W x H x D), and weight is 9.04 kg.

Engineering and use context

NAD uses a customised HybridDigital UcD output stage, operated in a fully balanced bridge configuration. Its power supply is rated for 80 W continuously and over 120 W instantaneously. Conversion is by the ESS SABRE ES9028, a 32-bit/384 kHz DAC. A separate headphone amplifier with a 2.2 ohm output impedance is built in.

Digital connections include HDMI eARC for TV audio in PCM, plus two optical and two coaxial inputs, and aptX HD Bluetooth uses a supplied antenna. Two line inputs, the MM phono input with its ground terminal, a pre-out and two subwoofer outputs with a default crossover of 80 Hz complete the signal section. Both sets of speaker terminals operate in parallel. For custom installation there are 12 V trigger in and out, IR in and out and RS-232. MDC2 adds two-way communication between module and host, and the optional MDC2 BluOS-D module adds BluOS streaming and AirPlay 2. Standby consumption is below 0.5 W, or below 2 W with network standby.

Pairing

Loudspeakers of 8 ohms or more are required in bridge mode. A turntable with a moving-magnet cartridge connects to the phono input. The matching power amplifier for bridged operation is the C 268.

Alternatives

The NAD C 389 is the 130 W per channel HybridDigital UcD integrated amplifier with the ESS Sabre 9028 DAC and two MDC2 slots.

Spezifikationen

  • Modellbezeichnung

    C 379

  • Typ

    Integrated Amplifier with DAC and Phono

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    2 + 1 (Phono)

  • Eingangsempfindlichkeit (mV)

    440

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    Ja

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    46 000

  • Ausgangsleistung (8Ω) (W)

    140

  • Ausgangsleistung (4Ω) (W)

    250

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    <0.03

  • Dämpfungsfaktor

    >300

  • Abmessungen (mm)

    435 x 100 x 410

  • Gewicht (kg)

    9.04

  • Offizieller Link

Weitere Komponenten