The CI SA2-120 is a BluOS streaming amplifier module from NAD for custom installation systems. It combines 240 W of NAD DirectDigital amplification with dual stereo outputs and the BluOS multi-room platform, and it runs either as one stereo zone or as two independent BluOS zones. The finish is black.
Key specs that matter
Amplification is DirectDigital, configured as 2 x 120 W or 4 x 60 W. Rated power output is 60 W per channel into 8 and 4 ohms, and IHF dynamic power is 150 W into 8 and 4 ohms. THD+N is 0.005%, and S/N ratio is above 102 dBA. Native sampling rates reach 192 kHz at 16 - 24 bit. Supported formats are MP3, AAC, WMA, WMA-L, OGG and OPUS, plus FLAC, MQA, ALAC, WAV, AIFF and MPEG-4 SLS, and Dolby Digital is downmixed to stereo PCM. The processor is a quad-core ARM Cortex-A53 at 1.8 GHz per core. Product dimensions are 146.5 x 44 x 384 mm (W x H x D), weight is 2.52 kg, and maximum power consumption is 240 W.
Engineering and use context
Its chassis is one third of a rack width and 1U high, with ChassisLink hardware for joining units and both rack and surface placement options. Cooling is by a thermostatic fan with front-to-rear airflow for stacking. NAD's Dynamic Power Management distributes power between the channels automatically. Speaker output 1 is zone 1 and speaker output 2 is zone 2, with independent volume control over output 2 when activated.
Networking is by Gigabit Ethernet or built-in dual-band Wi-Fi 5 (802.11ac). Bluetooth 5.2 with aptX HD is two-way, and AirPlay 2, Spotify Connect, Qobuz Connect and Tidal Connect are supported. More than 20 music services and internet radio are available through BluOS. Zone 1 also has HDMI eARC, Toslink optical and 3.5 mm analogue inputs, and a USB Type A port reads external storage. Each pair of speakers connects through a 4-pin snap-on Phoenix connector with 5.08 mm pitch, accepting wire up to 12 AWG. Control inputs are a configurable smart 12 V trigger and a 2-pin IR input for an IR extender kit. The operating range is 0 - 40 degrees C. Short and long rack ears, a Wi-Fi antenna and a Bluetooth antenna come in the box.
Pairing
Passive speakers rated at 4 or 8 ohms are supported on both outputs. A powered subwoofer connects to the RCA output, or wirelessly as a PULSE SUB+ linked to zone 1. Supported control systems are Crestron, Control4, RTI, Nice, URC, Lutron, Gira, Rako, Rithum, Free@Home and Josh.AI, and voice control is through Amazon Alexa Skills.
Alternatives
The NAD CI 720 V2 is a BluOS stereo zone amplifier from the same custom installation range.