Hifiverse

Vollverstärker - NAD C 389

Beschreibung, Bilder, technische Daten und Spezifikationen

NAD C 389
Bildquelle - (c) NAD

The C 389 HybridDigital DAC Amplifier is a stereo integrated amplifier from NAD's Classic Series. Its ESS Sabre DAC chip is the one used in the Masters M33, and the same chassis carries a moving-magnet phono stage, HDMI eARC, a dedicated headphone amplifier and two MDC2 upgrade slots.

Key specs that matter

Continuous power is 130 W per channel into 8 or 4 ohms, with THD below 0.02% from 250 mW to 130 W. Clipping power is 150 W. IHF dynamic power is 210 W into 8 ohms, 300 W into 4 ohms and 350 W into 2 ohms, and peak output current exceeds 26 A (1 ohm, 1 ms). Damping factor is above 150 (8 ohms, 20 Hz - 6.5 kHz). Input sensitivity for 130 W is 201 mV on the line inputs and 10.25% FS on the digital inputs, which accept up to 32-bit/384 kHz. Line input impedance is 56 kohms + 100 pF. Measured at the pre-out, signal-to-noise ratio is above 106 dB (IHF, A-weighted, unity gain), THD is below 0.002% at 2 V, channel separation is above 100 dB at 1 kHz and output impedance is source impedance plus 320 ohms. The MM phono input has an impedance of 46 kohms / 100 pF and accepts more than 80 mV at 1 kHz. Dimensions are 435 x 100 x 390 mm (W x H x D), and weight is 8.7 kg.

Engineering and use context

For the output stage NAD uses a customised HybridDigital UcD design with multiple UcD amplifier modules in a balanced bridged configuration, powered by a switch-mode power supply. Conversion is by the 32-bit/384 kHz ESS Sabre 9028. Both pairs of RCA line inputs have ultra-low-noise buffer amplifiers, and the phono stage includes infrasonic filtering circuitry. Its headphone amplifier has a 2.2 ohm output impedance.

Digital inputs are two optical, two coaxial and HDMI eARC. Outputs comprise two sets of speaker terminals, two subwoofer outputs and a preamp output. Two-way Qualcomm aptX HD Bluetooth receives from a phone and can also send to Bluetooth headphones or speakers. Custom installation connections are 12 V trigger in and out, IR in and out and RS-232. MDC2, introduced in 2021, gives two-way communication between an expansion module and the host. Installed in an MDC2 slot, the optional MDC2 BluOS-D module adds BluOS streaming for up to 64 zones, AirPlay 2 and MQA, and sets the subwoofer crossover from the BluOS app.

Pairing

A turntable with a moving-magnet cartridge connects directly to the phono input. The two subwoofer outputs allow a 2.1 or 2.2 system. An external power amplifier connects to the preamp output.

Alternatives

The NAD C 379 is the 80 W per channel HybridDigital UcD integrated amplifier with an ESS SABRE ES9028 DAC and two MDC2 slots.

Spezifikationen

  • Modellbezeichnung

    C 389

  • Typ

    Integrated Amplifier with DAC and Phono

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    2 + 1 (Phono)

  • Eingangsempfindlichkeit (mV)

    201

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    56 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    320

  • D/A-Wandlung

    Ja

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    210

  • Ausgangsleistung (4Ω) (W)

    300

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Signal-Rausch-Abstand (dB)

    >106

  • Klirrfaktor + Rauschen (%)

    <0.02

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    435 x 100 x 390

  • Gewicht (kg)

    8.7

  • Offizieller Link

Weitere Komponenten