Power amplifiers stereo — CH Precision M1.1
Description, images, technical data and specifications
CH Precision M1.1
Image source — © CH Precision
Specifications
Model name
M1.1
Input sensitivity (mV)
N/A
Input impedance (balanced) (Ω)
94 000
Input impedance (single-ended) (Ω)
47 000 or 300
Output impedance (balanced) (Ω)
N/A
Output impedance (single-ended) (Ω)
N/A
Max current (A)
N/A
Output power (8Ω) (W)
2 x 200
Output power (4Ω) (W)
2 x 350
Gain (dBu)
N/A
Frequency response low +/- 3dB (Hz)
N/A
Frequency response high +/- 3dB (Hz)
N/A
Signal to Noise Ratio (dB)
> 115dB in stereo and bi-amp modes, > 118dB in bridged mode
Total Harmonic Distortion + Noise (0% global feedback) (%)
< 0.1
Total Harmonic Distortion + Noise (100% global feedback) (%)
< 0.01
Max power consumption (W)
2200
Damping factor
N/A
Dimensions (mm)
440 x 440 x 266
Weight (kg)
71
Official link
More components
Power amplifiers stereo
CH Precision A1.5
The amplifier uses a powerful 1,700 VA transformer - it is housed in its own case, which is completely vibration-free and shielded. The power supply uses ESR capacitors, but they are not present in the signal circuit. The entire analog part of the device is assembled on discrete components. Feedback is configured from the front panel in increments of 20%.
Power amplifiers stereo
CH Precision M10 Stereo
Doubled the power supply capacity (vs. M.1.1) High End amp offers bandwidth up to 500kHz and delivers 2 x 550 Wt (4 Ohms load)!
