All
Power amplifiers stereo — ToneWinner AD-1PA
Description, images, technical data and specifications
ToneWinner AD-1PA
Image source — © ToneWinner
The AD-1PA is a stereo power amplifier from Tone Winner, built with substantial output power and a detailed dual-mode power-consumption specification. The AD-1PA brings Tone Winner's considered engineering to dedicated stereo power amplification.
Key specs that matter
Output power is a substantial 300W into 8 ohms. Gain is 29.5dBu. Frequency response spans a wide 10Hz to 100,000Hz within plus-or-minus 3dB. Signal-to-noise ratio exceeds a strong 108dB, with total harmonic distortion plus noise at or under an exceptionally low 0.008% at 100% global feedback. Maximum power consumption spans a detailed dual-range specification of 260-300W or 70-110W depending on operating mode. At 444 x 294 x 449mm and 43.4kg, the AD-1PA represents a substantial power amplifier commitment reflecting Tone Winner's considered engineering standards.
Sound and use context
Expect exceptionally clean amplification reflecting the strong over-108dB signal-to-noise figure and near-immeasurable 0.008% distortion figure, consistent with Tone Winner's broader considered engineering philosophy.
Pairing
The substantial 300W output handles demanding loudspeaker loads with confidence.
Alternatives
Tone Winner's own AD-1PA+ offers an updated version with a somewhat higher RCA signal-to-noise figure within the same broader catalogue.
Key specs that matter
Output power is a substantial 300W into 8 ohms. Gain is 29.5dBu. Frequency response spans a wide 10Hz to 100,000Hz within plus-or-minus 3dB. Signal-to-noise ratio exceeds a strong 108dB, with total harmonic distortion plus noise at or under an exceptionally low 0.008% at 100% global feedback. Maximum power consumption spans a detailed dual-range specification of 260-300W or 70-110W depending on operating mode. At 444 x 294 x 449mm and 43.4kg, the AD-1PA represents a substantial power amplifier commitment reflecting Tone Winner's considered engineering standards.
Sound and use context
Expect exceptionally clean amplification reflecting the strong over-108dB signal-to-noise figure and near-immeasurable 0.008% distortion figure, consistent with Tone Winner's broader considered engineering philosophy.
Pairing
The substantial 300W output handles demanding loudspeaker loads with confidence.
Alternatives
Tone Winner's own AD-1PA+ offers an updated version with a somewhat higher RCA signal-to-noise figure within the same broader catalogue.
Specifications
Model name
AD-1PA
Input sensitivity (mV)
N/A
Input impedance (balanced) (Ω)
N/A
Input impedance (single-ended) (Ω)
N/A
Output impedance (balanced) (Ω)
N/A
Output impedance (single-ended) (Ω)
N/A
Max current (A)
N/A
Output power (8Ω) (W)
320
Output power (4Ω) (W)
N/A
Gain (dBu)
29.5
Frequency response low +/- 3dB (Hz)
10
Frequency response high +/- 3dB (Hz)
100 000
Signal to Noise Ratio (dB)
>108
Total Harmonic Distortion + Noise (0% global feedback) (%)
N/A
Total Harmonic Distortion + Noise (100% global feedback) (%)
≤0.002
Max power consumption (W)
260-300 or 70-110
Damping factor
N/A
Dimensions (mm)
480 × 628 × 598
Weight (kg)
42
Official link
More components
Power amplifiers stereo
ToneWinner AD-1PA+