Hifiverse

Power amplifiers stereo — Burmester 909 MK5

Description, images, technical data and specifications

Burmester 909 MK5
Image source - (c) Burmester

The 909 MK5 is a stereo power amplifier in Burmester's Reference Line, built in the company's Berlin manufactory. Burmester has produced the 909 since 1990, and the MK5 is its fifth version. Its US price is USD 73,495. A mono variant is optionally available, and the stereo unit can also be bridged to mono with an adapter. Finishes are silver and black.

Key specs that matter

Output power is 600 W per channel into 4 ohms and 265 W per channel into 8 ohms in stereo (230 V, 1 kHz, 1% THD+N). Bridged to mono, it delivers 1900 W into 4 ohms and 1050 W into 8 ohms under the same conditions. Inputs are two balanced XLR sockets, wired pin 1 ground, pin 2 negative and pin 3 positive. Remote IN and OUT are 10 V DC sockets for a 5.5/2.5 mm barrel plug. Power consumption is 1500 W maximum, 150 W at idle and 4 W in standby. Dimensions are 482 x 498 x 482 mm (W x H x D), excluding binding posts and plugs, and weight is 72 kg.

Engineering and use context

Like all Burmester power amplifiers, the 909 MK5 is balanced in design and fully DC-coupled. Burmester attributes its almost load-independent transient response to a high damping factor, high current delivery and a generously dimensioned power supply. The heatsinks have silver anodised fins.

Processor-controlled fault diagnosis is built in. The protective circuits operate outside the signal path and monitor temperature, DC offset and overload. Overtemperature or excessive DC offset opens the output relays and shows a code in the ERROR display, one for each channel, while excessive current through the power transistors switches the amplifier to standby after a few seconds.

Unbalanced sources connect through the two supplied XLR-RCA adapter plugs. Mono operation requires a MONO adapter and bi-amping a BI-AMPING adapter, both available on request. The binding posts are the same as those on Burmester loudspeakers and accept pure-copper spade plugs or banana plugs. Through REMOTE IN and OUT the 909 switches on together with another Burmester unit as master or slave. Mains versions cover 200-254 V and 100-127 V at 50/60 Hz.

According to Burmester, each 909 takes about 100 hours of manufacturing time, with hand-populated circuit boards, selected transformers and a computer-aided measuring station, followed by a seven-day burn-in. The power cord and a REMOTE cable are included.

Pairing

A preamplifier or surround processor with its own volume control is required. Burmester specifies balanced XLR connection as the preferred input. The terminals and the BI-AMPING adapter allow bi-amping of loudspeakers with separate low and high/mid terminals.

Alternatives

The Burmester 956 MK2 is a smaller stereo power amplifier in the Burmester range.

Specifications

  • Model name

    909 MK5

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    1700

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    N/A

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    N/A

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    482 × 498 × 482

  • Weight (kg)

    72

  • Official link

More components