Hifiverse

Напольная акустика — Sonus Victor GrandeLuna MarkII

Описание, изображения, технические характеристики и спецификации

Sonus Victor GrandeLuna MarkII
Источник изображения — © Sonus Victor

The GrandeLuna MarkII from Sonus Victor is a very large sealed-box loudspeaker system with a 4+3 way layout, standing just over two metres tall. The Verona workshop builds it largely by hand, with drivers on both the front and the rear panel.

Key specs that matter

Quoted frequency range is 17 Hz to 30 kHz, sensitivity is 92 dB and nominal impedance is 4 ohms. The cabinet measures 202 x 46 x 62 cm (height, width, depth). The maker recommends amplification of around 600 W.

Engineering and use context

The front baffle carries two 25 mm silk-dome units (a super-tweeter and a tweeter), two 200 mm midrange units, one 250 mm woofer and two 320 mm treated-paper woofers. The rear panel adds a 25 mm silk-dome tweeter and a 50 mm silk-dome midrange. Enclosures are made from layered high density fibreboard, finished in wood veneer or custom paint. The hand-assembled crossover uses Mundorf components matched in pairs.

Pairing

With its low impedance and a recommended power figure in the hundreds of watts, the system calls for a high-current power amplifier.

Характеристики

  • Название модели

    GrandeLuna MarkII

  • Нижняя граница частотного диапазона +/- 3дБ (Hz)

    17

  • Верхняя граница частотного диапазона +/- 3дБ (Hz)

    30000

  • Чувствительность (dB at 1 W/1m)

    92

  • Импеданс (Ohms)

    4

  • Требования к усилителю мощности (W)

    N/A

  • Наличие встроенного усилителя

    Н/д

  • Мощность встроенного усилителя (W)

    N/A

  • Размер (sm)

    202 x 46 x 62

  • Вес (kg)

    N/A

  • Официальная ссылка