Hifiverse

Ресиверы — Emotiva BasX MR1L

Описание, изображения, технические характеристики и спецификации

Emotiva BasX MR1L
Источник изображения — © Emotiva

The Emotiva BasX MR1L is a cinema receiver that combines a 13.2-channel surround sound processor with a 9-channel power amplifier in a single chassis. Both Dolby Atmos and DTS:X formats are handled, and speaker layouts are supported from 2.1 up to 7.2.4. Emotiva listed it at USD 1,599, though it has since been discontinued. Boxed, it weighs 19 kg.

Key specs that matter

Into 8 ohm each channel produces 150 W RMS with one channel driven, 140 W with two, 110 W with five and 85 W with all nine, all at under 0.1% THD. The matching 4 ohm figures are 220 W, 200 W, 140 W and 100 W. Frequency response is 20 Hz to 20 kHz within 0.05 dB, with a broader band of 5 Hz to 80 kHz within 3 dB, while distortion is under 0.0025% at 1 kHz and noise is over 105 dB down at 1 kHz. Video handling comes through six HDMI 2.0b inputs and two HDMI 2.0b outputs, supporting 4K UHD with HDR10, HDR10 plus and Dolby Vision, and the primary output handles ARC and eARC. Audio inputs number four unbalanced stereo analogue pairs, two coaxial S/PDIF, two optical Toslink, one USB audio input and a Bluetooth receiver. The chassis is 432 x 146 x 356 mm without connectors and weighs 15 kg unboxed.

Engineering and use context

Decoding is performed by an Analog Devices SHARC DSP, covering Dolby TrueHD, Dolby Atmos, Dolby Surround, DTS:X, DTS HD Master Audio and DTS Neural X. The amplifier section draws on a 660 VA toroidal transformer. Measured with connectors attached, the receiver occupies 508 x 254 x 559 mm. Outputs include nine speaker channels, 13.2 channels of unbalanced line-level preamp outputs and two balanced subwoofer outputs. The full preamp set allows the internal amplifier to be switched off entirely so the MR1L acts only as a surround processor, or an optional 4-channel amplifier can be added to reach 13.2 channels. A backlit remote with Live Trim is supplied, and the mains input detects 115 or 230 V AC at 50 or 60 Hz automatically.

Pairing

With nine powered channels the MR1L can run a 5.1.4 or 7.1.2 layout on its own, while the two balanced subwoofer outputs feed active subwoofers. For larger 7.2.4 systems, an external stereo or multichannel power amplifier connects to the line outputs for the remaining channels.

Alternatives

The Emotiva BasX MR1 is the larger cinema receiver of the range, with eleven amplified channels rated at 100 W each with all driven, for USD 1,999.

Характеристики

  • Название модели

    BasX MR1L

  • Тип

    AV Reciever

  • Количество основных каналов

    9

  • Количество каналов сабвуфера

    2

  • Декодирование до Dolby Atmos

    Да

  • Декодирование до DTS:X

    Да

  • DSP-чип

    Н/д

  • Phono

    N/A

  • Выходная мощность (8Ω)

    85

  • Выходная мощность (4Ω)

    100

  • Нижняя граница частотного диапазона +/- 3дБ (Hz)

    20

  • Верхняя граница частотного диапазона +/- 3дБ (Hz)

    20 000

  • Отношение сигнал/шум (dB)

    >100

  • Коэффициент гармонических искажений + шум (%)

    < 0.05

  • Коэффициент демпфирования

    >400

  • Габариты (mm)

    432 × 146 × 356

  • Вес (kg)

    15

  • Официальная ссылка

Другие компоненты