在庫あり
The HPA-3000 GT is Allnic Audio’s output transformer coupled, stereo headphone amplifier. The HPA-3000 GT has a voltage gain of +28dB, and a maximum output of three (3) watts. It works best with headphones having an impedance of from 30 to 600 ohms. The HPA-3000 GT has the following features: • Works best with headphones having an impedance of from 30 to 600 ohms • High-quality, NOS tubes • Pure Class A operation • Headphone output: The HPA-3000 GT is equipped with two (2) headphone output ‘jacks’ and two (2) four (4) pin XLR All work for both low and high impedance headphones • Pre-amp output: The HPA-3000 GT is equipped with one (1) pair of RCA pre-amp outputs, whose impedance is around 10 ohms; this extremely low value provides very powerful driving capability with the widest frequency range to a connected amplifier • Volume control: The HPA-3000 GT’s volume control is the large knob in the center of front panel. It rotates clockwise (gain increased) and counter-clockwise (gain reduced) – No remote control • As are all Allnic Audio products, the HPA-3000 GT is fully RoHS (EU Reduction of Hazardous Substances regulation) compliant in construction and materials
Model name
HPA-3000
Maximum Power, 32 Ohms (mW RMS per channel)
3000
Frequency response low +/- 3dB (Hz)
20
Frequency response high +/- 3dB (Hz)
20 000
Gain (dBu)
28
Signal to Noise Ratio (dB)
63
Dimensions (mm)
240 x 330 x 175
Weight (kg)
10.0
Official link