Speaker and amplifier matching is the process of pairing an amplifier with loudspeakers whose sensitivity, impedance and power needs it can meet. Getting it right protects both components and decides how loud and controlled a system can play in a given room.

John Makovsky

John Makovsky

John Makovsky

John Makovsky

John Makovsky
Three numbers carry most of the decision. Sensitivity, quoted in dB at 1 watt and 1 metre, shows how much level a speaker gives per watt - every 3 dB less doubles the power needed. Nominal impedance of 4, 6 or 8 ohms sets how much current the amplifier must deliver. Rated output into that load, plus headroom for peaks, closes the loop. An 85 dB speaker needs four times the power of a 91 dB model for the same level.
Long-form buying comparisons of integrated amplifiers make up this page. Two parts cover entry and mid-tier stereo models, two more rank high-end integrated units, and a separate showdown handles the upper-middle price bracket. Each series includes comparison charts, specification matrices and loudspeaker pairing advice for the amplifiers it tests. The pairing sections explain which speaker loads suit each class of design and where a stronger power supply pays off.
Sensitivity - the figure that tells you whether a modest amplifier is enough. Impedance curve - dips below the rated figure load the output stage harder. Damping factor - a measure of how firmly an amplifier controls the woofer. Power into 4 ohms - a doubling from the 8-ohm figure points to a stout power supply and good current delivery.
Continue with Class A Amplification, Class AB Amplification and Hybrid Amplifiers for circuit types, or Tube (Valve) Hi-Fi for low-power designs. Current integrated units sit in the Amplifiers section of the catalog.