A balanced mode radiator (BMR) is a flat-diaphragm drive unit that moves like a piston at low frequencies and uses controlled bending above them. One small BMR can cover most of the audible band, so compact speakers can drop a crossover point and keep wide dispersion.

John Makovsky
Ordinary cones are built stiff to avoid breakup modes. A BMR does the opposite. Weights fixed to the rear of a flat disc tune its bending modes, and the voice coil sits at average nodal positions. Pistonic output in the bass and modal output in the treble add together. Designers gain a full-range unit only 2 to 3 inches across that radiates evenly into a room, which suits slim towers, lifestyle speakers and multi-driver columns.
The tag opens with one launch report on the Etude Tri-Linear Array (ETLA), a compact floorstander from CML Music designed by Dr Christopher Mark Liauw. The story covers why BMR arrays were chosen and why the speaker targets low-powered amplifiers. More news on BMR loudspeakers, active models and wireless systems with these drivers will follow here.
CML Music Etude ETLA - twelve 85 mm BMR units in three columns of four, plus a compression tweeter. Q Acoustics Q Active 400 - two 58 mm BMR full-range drivers per cabinet over two subwoofers. Cambridge Audio Minx Min12 - a satellite with one fourth-generation 2.25 inch BMR. Rega RS10 - a floorstander that hands most of the band to a BMR. Audio Pro A48 - a streaming tower with a 2 inch BMR as tweeter.
See Line Array Loudspeakers for multi-driver columns and Active Loudspeakers for powered BMR designs. Wireless Speakers covers lifestyle models, and every BMR-equipped speaker sits in the catalogue under Loudspeakers.