The VT-E is a vertical plug and play turntable from Pro-Ject Audio Systems. It is a belt-drive deck that can stand on a table or be mounted on a wall, and the wall-mounting kit is included. Pro-Ject offers an R version for right-handed users and an L version for left-handed users. Finishes are black matt, red matt and white matt.
Key specs that matter
Speeds are 33 and 45 rpm with manual speed change. Speed variance is 0.8% at 33 rpm and 0.7% at 45 rpm, and wow and flutter is 0.29% and 0.27%. Signal-to-noise ratio is 65 dB. A 300 mm MDF platter of 0.8 kg with a felt mat runs on a stainless steel main bearing. Its aluminium tonearm has an effective length of 218.5 mm, an overhang of 22.0 mm and an effective mass of 8.0 g. Tracking force range is 0 - 25 mN, pre-adjusted to 18 mN. Power consumption is 4.5 W. Dimensions are 430 x 345 x 245 mm (W x H x D) standing on a table and 430 x 310 x 130 mm mounted on a wall, and net weight is 2.8 kg.
Engineering and use context
Drive is by a silicone belt from a low-vibration synchronous motor with a DC power supply. A record clamp fixes the record on the platter, and Pro-Ject states that a special mechanism keeps the stylus tracking in the vertical position.
An Ortofon OM cartridge is pre-mounted on the arm. Tracking force and anti-skating are set for this cartridge at the factory, and the deck comes pre-adjusted out of the box. The counterweight included with the arm covers cartridges of 3 - 5.5 g. A gold-plated RCA phono cable is soldered directly to the deck and pre-mounted.
In the box are the power supply, the record clamp, a felt mat, an adapter for singles, the wall-mounting kit and an allen key.
Pairing
The VT-E has no built-in phono preamplifier. A phono stage with an MM input is required, either a separate phono preamplifier or the phono input of an amplifier. The output is a fixed RCA phono cable.
Alternatives
The Pro-Ject VT-E BT is the same vertical design with a built-in phono preamplifier and a Bluetooth transmitter.