Hifiverse

Plattenspieler - Pro-Ject The Classic Reference Turntable

Beschreibung, Bilder, technische Daten und Spezifikationen

Pro-Ject The Classic Reference Turntable
Bildquelle - (c) Pro-Ject

The Classic Reference is a belt-drive turntable from Pro-Ject Audio Systems of Austria. It is based on The Classic EVO and draws on the 175 VPO, the turntable Pro-Ject built in 175 pieces for the Vienna Philharmonic. It is equipped with Pro-Ject's high-end EVO 9 AS HG tonearm and is available with a hand-selected VPO Anniversary MC cartridge pre-installed as a plug'n'play turntable. German list prices are EUR 4,990 in Piano/Silver and EUR 5,990 in Acacia/Brass.

Key specs that matter

Speeds are 33, 45 and 78 rpm with electronic speed change. The platter is 300 mm aluminium with a TPE damping ring, on a stainless steel main bearing. Wow and flutter is ±0.03% at 33 rpm and ±0.04% at 45 rpm, and speed variance is ±0.08% and ±0.10%. Signal-to-noise ratio is 73 dB. The tonearm has an effective length of 230 mm, an effective mass of 24.2 g and an overhang of 18 mm. Outputs are RCA and balanced XLR. Dimensions are 460 x 131 x 351 mm (W x H x D) with the lid closed, and weight is 11 kg.

Engineering and use context

The chassis is an aluminium and MDF sandwich. Platter and tonearm are mounted on a floating sub-chassis that sits on decoupling TPE damping balls. This sub-chassis isolates them from the resonances of the motor and the main plinth.

The platter is precision-machined from an aluminium alloy and damped with a TPE ring on the inside. It runs on a diamond-cut aluminium sub-platter. The motor is powered by a DC-driven AC generator built into the turntable.

Pro-Ject's EVO 9 AS HG is a 9-inch tonearm with an S-shaped aluminium tube and an inverted cardanic bearing of Swiss ABEC 7 quality with four stainless steel tips. An SME connector allows quick cartridge changes. Azimuth and VTA are fully adjustable, and the counterweight is TPE-damped. The feet are height-adjustable and decoupled. A dust cover, the Leather it mat, the Clamp it record clamp, a Connect it Phono E RCA cable and a 15 V DC power supply are included.

Pairing

A phono stage is required. With the VPO Anniversary MC it has to be an MC stage, either a separate phono preamplifier or the MC input of an amplifier. The balanced XLR output is intended for phono stages with balanced inputs.

Alternatives

The Signature 12.2 is a higher model in the Pro-Ject range, also belt-driven, with a magnetically decoupled platter.

Spezifikationen

  • Modellbezeichnung

    The Classic Reference Turntable

  • Geschwindigkeit

    N/A

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    Fixed

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    EVO 9 AS HG tonearm

  • Tonabnehmer vorinstalliert

    Ja

  • Tonabnehmermodell

    VPO Anniversary MC

  • Plattenteller

    300 mm aluminium with TPE damping ring

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    460 x 131 x 351

  • Gewicht (kg)

    N/A

  • Offizieller Link